6. Management Utilities (Web & Telnet)
6.1 About Management Utilities
SAMSUNG MagicLAN has three ways of managing the configuration setup for SWL-2000AP: through
Hyper Terminal, Web and Telnet service. Using one of those three, you can change the initial setup for AP
that you were supposed to do at the previous chapter. (6. Access Point Installation)
6.2 TELNET Management Utility
6.2.1 Telnet Management Utility Overview
In order to browse Telnet management setup, type the command "telnet xxx.xxx.xxx.xxx" in DOS windows
and the TELNET screen will appear as follows. Here, "xxx.xxx.xxx.xxx" represents the IP address of your
destination AP. When you are prompted to type in the password, enter "default" which is preset as a default
password.
6.2.2 Various Commands and Usage
6.2.2.1 Usage of the command line
55