Table of Contents
Advertisement
17-4
Outdoor Unit operation
575555
Low noise setting operation
Perform the low noise operation control for the selected outdoor unit.
Select the following screen
For the below screen, see par.18-1 Quick operation .
Set the low noise.
5
[Level] label
When the screen is opened, the status (operation value) of the selected outdoor unit is displayed.
When the "Level" was changed at , the changed value is displayed.
[Level] selection radio button.
Selects the [level]. Level 3 is the most quiet state.
When the screen opens, no button is selected.
[Priority] label
The set value is displayed.
When the screen opens, blank is displayed. ("Low Noise" and "Performance" are not selected.)
[Priority] selection radio button
Selects the [Priority].
These buttons cannot be selected when the screen opens. They can be selected after "Level" was
selected at .
●
Performance: When air conditioning capacity is not sufficient, the noise may be higher level than
specified.
●
Low Noise: When air conditioning capacity is not sufficient, the air conditioning capacity may not
be as high as expected.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
to display the "Low Noise Setting" screen.
175
Advertisement
Table of Contents
