Philips 6000 Series User Manual page 17

e. Click on "Get started." The setting
is complete.
4. If you connect the USB cable from
"Thunderbolt input
this monitor, please enter OSD menu
to make a appropriate selection of
"Thunderbolt"
layer.
  
   
 
 
 

Note
1. Please always go to Windows
official website to access the latest
information, the information in EDFU
is subject to change without further
notice.
2. Different regions have different
voltages, with inconsistent voltage
setting may cause water ripple when
using this webcam. Please make the
voltage setting same as the voltage
of your region.
3. This monitor has a webcam active
beacon that lights up when the
webcam is in use. There are four
brightness options, 0=OFF to
" port of
under the "KVM"


 
4=HI, default 3. You can press
the OSD button
on-screen display menu, under
Webcam>Webcam light, to adjust
the brightness level.
15
to enter the