Husqvarna Fleet Services Operator's Manual page 5

Layers .
3. Select
4. Select the product that is to be used with the
Husqvarna Fleet Services
5. Select Install sensor > Scan QR code > Approve .
6. Scan the QR code on the sensor circuit with your
mobile device.
To examine where to install the
Husqvarna Fleet Services
Sensor
CAUTION:
Fleet Services
product where it prevents the product to
operate correctly.
Note:
For battery operated products, the LED
indicator on the sensor circuit must flash when the
product operates on full and low clutch.
1. Do a pairing operation. Refer to
operation with a product on page 4 .
2. Start the product.
3. Hold the Husqvarna Fleet Services
Sensor near the product to find the electromagnetic
field. Make sure that the LED indicator on the sensor
circuit flashes one time each second.
CAUTION:
on the antenna of the sensor. Hold the
sensor by the bottom cover.
2132 - 001 - 19.10.2023
™
Machine Sensor.
™
Machine
Do not install the Husqvarna
™
Machine Sensor on the
To do a pairing
™
Machine
Do not put your hands
4. Examine that there is sufficient space to install the
sensor bottom cover on the product. Use a pair
of pliers to remove the outer holes on the sensor
bottom cover if it is necessary.
To install the Husqvarna Fleet
™
Services Machine Sensor on a
product
1. Examine where to install the Husqvarna Fleet
™
Services Machine Sensor. Refer to
where to install the Husqvarna Fleet Services
Machine Sensor on page 5 .
2. Attach the adhesive tape on the sensor bottom
cover.
3. Attach the sensor bottom cover on a flat and clean
surface on the product.
4. Drill 2 holes that are 4 mm/0.2 in. in diameter.
To examine
™
5