Toshiba IK-WB02A User Manual page 58

Recording Images on FTP Server (Cont.)
Configure each setting items.
IFTP General Settings
You can control the settings to connect to an FTP server.
GFTP sever:
Select either one of them below and enter correct information.
Server Name
•
IP Address
•
GUser ID:
Only for a user who has the right to access FTP server. Ask FTP server
administrator for details.
GPassword:
Enter password registered with user ID above.
•
GPort Number:
Usually, enter "21".
Important
• Do not change the port number unless your provider or the network
administrator instructs you to do so.
GMODE:
PORT (active mode): Select PORT if you are unsure about which mode to
•
PASV (passive mode): When the camera's network environment is protected by
•
GConnection to FTP Server:
Select "Stay connect" when transferring data frequently, like "Periodic FTP by
•
Schedule". In this way, you can record images faster.
42
choose.
Firewall or the like, access from outside FTP server may
not be possible with PORT (active mode). In this case,
select PASV (passive mode).