Advertisement
TIMER DISPLAY CHART
The following chart explains everything which can appear in the time display window.
Meaning
Clock display
To display the present time
}——.
"LOCK" is displayed.
The time setting is locked. The clock setting
and the timer program cannot be changed by
depressing the ADJUST key or the WRITE
key.
To release the lock, press the 0, 0, 7 number
keys.
"E" blinks.
This indicates that there has been a power
interruption.
Set the clock and the timer program again.
The hyphen blinks.
fhe colon blinks. us
The present time is being set.
The timer setting display
Set the present time.
The display will return to the clock mode in a
few minutes.
To set the clock mode immediately, depress
the CLOCK key.
Both "ON" and "OFF"
blink.
The timer program is being set.
Select either ON time or OFF time.
Depress the TURN ON or TURN OFF key and
continue to set the timer setting.
The hyphen blinks.
aM
Allottherd
Only the colon blinks.
The timer program is being set.
Continue to set the timer setting.
The timer setting has been erased.
The display will return to the clock mode ina
few minutes.
Depress the CLOCK key to display the clock
mode immediately.
| Both "ON" and "OFF"
blink.
The timer setting is being erased.
The CLEAR key has been depressed.
Depress the SEND key to finish erasing the
timer setting.
The clock display blinks.
The clock setting is being set.
Check the digits on the display.
Depress the SEND key to complete the clock
setting.
.
The timer program display
blinks.
ae "Other displays.
The timer program is being set or the
REWRITE key has been depressed.
The unit minute and the seconds of the pre-
sent time are displayed or count-up or count-
down is in progress.
Check the timer program and depress the
SEND key.
Rewrite the timer program and depress the
SEND key.
Depress the CLOCK key.
The WRITE key has been depressed when no
more timer programs can be set.
Rewrite the program to set the new timer
setting.
Depress the CLOCK
key to return the clock
mode.
The TIMER LIST key has been depressed
when no timer program has been set.
This is the display which indicates where the
present time would fall during the list up or
list down of the timer programs.
The display will return to the clock mode ina
few minutes.
to return to the clock mode immediately,
depress the CLOCK key.
13
Advertisement
