Table of Contents
Advertisement
Radio Monitor (R - M)
Metai Tape Salector (MTL)
.
CB Switch (CD) (Option)
Touoh "MTL" for playing metal or CrO, tape. At on, the "& "
chee: to tha disc-play
mark is shown. Switch off for playing normal tape. The "& "
®@ During tape playback, if
mark goes off.
you change to the disc-
NOTE: This switch serves as an equalizer for reproduction of
play,
simply
touch
the
tape recorded using Metal or CrO, tape with 70us equali-
"CD".
Zation, or tape recorded using "normal" tape with 120us
The display will change
equalization.
Wrong
setting
will cause
high frequency
to the
CD
mode.
And
Dolby "B" Noise Reduction (008B)
Touch "DOB" for playback of the tape recorded by the Dolby "B" Noise Reduction Sys-
tem. At on, the " \ " mark is shown.
Touch "OOB" (the "%" mark goes out) to cancel Dolby "B" for playback of tape. not
recorded by the Dolby Noise Reduction System "B". Cassette tapes not recordod with
Dolby NR do not benefit from use of Dolby NR during playback. Using the Dolby NR
System on tapes not encoded with Dolby NR causes high frequency imbalance.
NOTE: The Dolby NR circuit will not operate in radio mode.
Dolby
noise
reduction
manufactured
under
license
from
Dolby Laboratories Licensing Corporation.
"DOLBY"
and the double-D symbol 00 are trademarks
of
Dolby Laboratories Licensing Corporation.
Advertisement
Table of Contents
