Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WQG24200AU
Summary of Contents for Bosch WQG24200AU
- Page 1 Tumble dryer WQG24200AU [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety ........... 4 9 Programmes ...... 26 1.1 General information.... 4 9.1 Automatic programmes... 26 1.2 Intended use...... 4 9.2 Timed programmes .... 27 1.3 Restriction on user group.. 4 10 Accessories...... 29 1.4 Safe installation ...... - Page 3 16 Troubleshooting...... 41 17 Transportation, storage and disposal ........ 46 17.1 Preparing the appliance for transportation ...... 46 17.2 Disposing of old appliance ... 46 18 Customer Service.... 47 18.1 Product number (E-Nr.) and production number (FD).. 47 19 Consumption values.... 48 20 Technical data ...... 49...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
-
Page 9: Safe Cleaning And Maintenance
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Foam and foam rubber may deform 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may ATTENTION! damage the surfaces of the appli- The functionality of the appliance ance. -
Page 12: Energy Saving Mode
en Installation and connection Spin the laundry in the washing ma- 4 Installation and con- chine before drying. nection a Damper laundry extends the pro- gramme duration and increases energy consumption. 4.1 Unpacking the appliance Observe the programme's maximum ATTENTION! load capacity. Objects remaining in the drum that → "Programmes", Page 26 are not designed for operation with a If the maximum load is exceeded,... -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Replace the accessories in ques- If the appliance is operated immedi- ▶ tion before operating the appli- ately after transportation, the refriger- ance. ant contained in the appliance may → "Accessories", Page 29 result in damage to the appliance. Immediately after transporting the ▶... -
Page 14: Water Drain Hose
en Installation and connection hose to drain away excess condens- Installation loca- Requirements ation directly into the waste water tion system. In a washer-dryer Only use the ori- Notes stack ginal connection ¡ Operate this appliance using the set from the water drain hose provided. - Page 15 Installation and connection en Pull out the condensation hose Push the water drain hose as far from the connecting piece. as it will go into the connecting piece. The condensation hose is connec- ted to the connecting piece at the Insert the water drain hose into the factory.
-
Page 16: Aligning The Appliance
en Installation and connection Water outlet connection types Secure the elbow to the gully. ATTENTION! In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶ 4.5 Aligning the appliance sure that the wastewater drains away quickly and eliminate any In order to reduce vibrations and... -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Door Maintenance flap on the base Condensation container... -
Page 18: Control Panel
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 30 Display → Page 19 Buttons → Page 22... - Page 19 Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 27 Recommended The maximum load capacity for the selec-...
-
Page 20: Display
en Display Display Designation Description Iron Dryness level: Iron The dryness level is activated. Dry) → "Buttons", Page 23 Cup- Dryness level: The dryness level is activated. borad Dry) Cupboard Dry → "Buttons", Page 23 Cup- Dryness level: The dryness level is activated. board Dry Cupboard Dry → "Buttons", Page 22 Plus) - Page 21 Display en Display Designation Description End of pro- Programme status gramme Example...
- Page 22 en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Start/Pause ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3 sec. ¡ Activate Activate or deactivate the childproof lock. ¡ Deactivate Disable the control panel to prevent unwanted or accidental operation.
- Page 23 Buttons en Button Selection Description Cupboard Dry Cupboard Dry ¡ Selecting Cupboard ¡ Dry activates the dry- ¡ +1 ness level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡...
- Page 24 en Buttons Button Selection Description Finished in ¡ Programme end time ¡ Set the programme end time. ¡ Programme duration The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
-
Page 25: Changing The Dryness Level
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Multi-layered, thick laundry The laundry is dry. Dry Plus that does not dry readily. -
Page 26: Programmes
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 27: Timed Programmes
Programmes en Programme Description Max. load (kg) ¡ If you dry the pillows and the pillows are not completely dry at the end of the programme, dry the pillows with a timed programme. → "Timed programmes", Page 27 Sportswear Dry self-drying sportswear made of per- formance fibres, microfibres and synthet- ics. - Page 28 en Programmes Programme Description Max. load (kg) Timed Program Cold Dry all types of fabric except for wool and silk. Also suitable for freshening up or airing clothing that has hardly been worn. Timed Program Dry all types of fabric except for wool and Warm silk.
-
Page 29: Accessories
Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 47. Order number Connection kit To save space, stack the WTZ20410 appliance on a suitable washing machine of the same width and depth and that is from the... -
Page 30: Laundry
en Laundry 12.2 Setting a programme 11 Laundry Turn the programme selector and set the required programme. 11.1 Preparing the laundry → "Programmes", Page 26 If required, adjust the programme ATTENTION! settings. Objects remaining in the laundry may damage the laundry and the drum. 12.3 Loading laundry Remove all items from any pock- ▶... -
Page 31: Cancelling The Programme
operation en The cooling process starts auto- Requirements matically after approximately 30 ¡ The display shows the following seconds and cools down the laun- after drying: "End" dry while the drum is rotating. If ¡ or the display shows the following you want to avoid or cancel the during operation: cooling process, open the door. - Page 32 en operation Disconnect the two-part fluff filter. Clean the two fluff filters thoroughly under warm, running water and then dry them off. Open the two fluff filters. Close the two fluff filters and put them together. Remove the fluff. Insert the two-part fluff filter. Close the door.
-
Page 33: Filter System On The Base Unit
operation en Use a soft brush to clean the heat 12.10 Filter system on the exchanger cover. base unit During drying, fluff from the laundry is collected in the base unit's filter sys- tem. The filter system protects the ap- pliance from fluff. Cleaning the filter system on the base unit If the display shows a notification... -
Page 34: Condensation Container
en operation Push the filter mat onto the retain- Requirements ers. ¡ The display shows the following after drying: "End" ¡ or the display shows the following during operation: Pull out the condensation con- tainer, keeping it level. Ensure that the cleaned filter mat is not deformed, damaged or in- verted when you push it onto the retainers. -
Page 35: Childproof Lock
Childproof lock en Inserting the condensation container Push the condensation container ▶ in as far as it will go. 13 Childproof lock Secure your appliance against being operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold the two ▶ sec. -
Page 36: Basic Settings
en Basic settings 14 Basic settings You can configure the basic settings for your appliance to meet your needs. 14.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 37: Changing The Basic Set- Tings
Cleaning and servicing en 14.2 Changing the basic set- nothing but water and a damp tings cloth. Set the programme selector to po- Remove all de- Fresh deposits sition 1. tergent residue, are easier to re- spray residue or move without other residues leaving any immediately. - Page 38 en Cleaning and servicing Open the lever for the heat ex- Use a soft brush to clean the heat changer cover. exchanger cover. Make sure that you remove all dirt Pull out the heat exchanger cover from the seal. by the handle. Carefully clean the fins on the heat exchanger with a vacuum cleaner and brush attachment.
-
Page 39: Moisture Sensor
Cleaning and servicing en Clean the opening with a soft, Close the maintenance flap. damp cloth. 15.3 Moisture sensor Close the base unit → Page 39. The moisture sensor in this appliance Closing the base unit measures how damp the laundry is Requirement: The base unit is open. during the drying cycle. - Page 40 en Cleaning and servicing Clean the moisture sensor with a sponge.
-
Page 41: Troubleshooting
Troubleshooting en 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 42 en Troubleshooting Fault Cause and troubleshooting Creasing. The load is too large. Observe the maximum load capacity of the ▶ → "Programmes", Page 26. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
- Page 43 Troubleshooting en Fault Cause and troubleshooting Condensation in the Ensure that the water drain hose is connected cor- ▶ condensation tank rectly. even though the water → "Connecting the water drain hose", Page 14 drain hose is connec- ted. The programme does Childproof lock is activated. not start.
- Page 44 en Troubleshooting Fault Cause and troubleshooting The drying time is too Cleaning the heat exchanger. long. → "Cleaning the base unit", Page 38. Closing the base unit. → "Closing the base unit", Page 39. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting The laundry is too Moisture sensor dirty. damp. → "Cleaning the moisture sensor", Page 39. ▶ The drying process is interrupted and the condensa- tion tank has been filled. → "Emptying the condensation container", Page 34. → "Inserting the condensation container", Page 35. → "Starting the programme", Page 30.
-
Page 46: Transportation, Storage And Disposal
en Transportation, storage and disposal Empty the condensation container 17 Transportation, stor- → Page 34. age and disposal Insert the condensation container → Page 35. Disconnect the appliance's mains 17.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported. -
Page 47: Customer Service
Customer Service en Information about current disposal ¡ On the rear of the appliance. methods are available from your Make a note of your appliance's de- specialist dealer or local authority. tails and the Customer Service tele- phone number to find them again This appliance is la- quickly. -
Page 48: Consumption Values
en Consumption values 19 Consumption values The specified values are indicative amount of laundry being loaded, en- only and were determined in accord- vironmental conditions and the activ- ance with the applicable standard ation of additional functions. IEC61121. The expected programme dura- The actual values may deviate from tion/"Ready in"... -
Page 49: Technical Data
Technical data en Mains voltage 220-240 V, 20 Technical data 50 Hz Minimum in- Appliance height 84.2 cm stallation protec- tion Appliance width 59.8 cm Appliance depth 61.3 cm Nominal power 625 W Ambient temper- ¡ Minimum: Appliance depth 64.8 cm ature 5 °C with door closed ¡ Maximum: Appliance depth 109.6 cm 35 °C... - Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.