Changing The Seat Suspension; Adjusting The Rear-Shock Assemblies - Toro 72907 Operator's Manual

Machines without MyRide™
Suspension System
To unlatch the seat, push the seat latch forward
(Figure 13).
Figure 13
1. Seat latch
Changing the Seat
Suspension
Machines without MyRide™
Suspension System Only
The seat is adjustable to provide a smooth and
comfortable ride. Position the seat where you are
most comfortable.
To adjust it, turn the knob in front either direction to
provide the best comfort
Figure 14
1. Seat-suspension knob
2. Seat
(Figure 14).
Adjusting the Rear-Shock
Assemblies
Machines with MyRide™
Suspension System Only
The MyRide™ suspension system adjusts to provide
a smooth and comfortable ride. You can adjust the
rear 2-shock assemblies to quickly and easily change
the suspension system. Position the suspension
system where you are most comfortable.
The slots for the rear-shock assemblies have
detent positions for reference. You can position the
rear-shock assemblies anywhere in the slot, not just in
g008956
the detent positions. The following graphic shows the
position for a soft or firm ride and the different detent
positions (Figure
1. Firmest position
2. Softest position
Note:
Ensure that the left and right rear-shock
assemblies are always adjusted to the same positions.
Adjust the rear-shock assemblies
g019768
23
15).
Figure 15
3. Detents in the slots
(Figure
g030065
16).