Siemens SICHARGE D Operating Instructions Manual page 105

Integration into the controller of the charging station
The dispensers are not autonomous charging points. Many components are only present in
the central charging station, including the main controller, for example. Consequently, the
dispensers must be integrated into the controller and automation of the SICHARGE D. For
this, clamping points in the charging station must be connected as follows:
• ‑FA7 ... ‑FA11 (older hardware version)
• ‑FA10 ... ‑FA12 and ‑XD36 (newer hardware version)
.
Ethernet cables
The dispensers are connected to the central charging station via Ethernet cables. Dispenser 1
is connected to port -FA4 and Dispenser 2 (not used) to port -FA5 for this purpose. This
provides communication and remote access to the dispensers via the backend systems.
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
Installation and mounting
5.6 Connecting the charging station
105