Table of Contents
Advertisement
Cleaning and care
Switch off the extractor hood and isola-
te by pulling out the mains plug or swit-
ching off the disconnector on the instal-
lation side.
At the same time as you renew the
grease filter (see Filters and
maintenance), clean off any grease from
all accessible parts of the housing.
This significantly reduces the fire hazard
and ensures that the extractor hood
performs as effectively as possible.
Clean the extractor hood with a hot
detergent solution or a mild window
cleaning agent.
If the hood is extremely dirty (older
stains), use a liquid window cleaner.
Do not scratch off dried-on dirt, but
wipe off with a damp cloth.
Do not use scouring agents.
Warning: Clean the control buttons with a
mild detergent solution and a soft, damp
cloth only.
Painted, aluminium and plastic surfaces:
Do not use scouring agents or abrasive
sponges.
Do not use dry cloths.
Do not use corrosive, acidic or alkaline
cleaning agents.
Note: Do not use alcohol (spirit) on
plastic parts, otherwise the surface may
become matt in appearance.
Caution! Ensure that the kitchen is ade-
quately ventilated. Avoid naked flames.
8
All manuals and user guides at all-guides.com
Changing the bulbs
Candle bulbs:
1. Switch off the extractor hood and isolate
2. Remove the filter frame.
3. Replace the bulb
4. Attach the filter frame.
by pulling out the mains plug or swit-
ching off the disconnector on the instal-
lation side.
See grease filter.
(standard filament bulbs, max. 40 watt,
E 14 bulb holder).
See grease filter.
Advertisement
Table of Contents
