Table of Contents
Advertisement
en-us_main.book.book Page 15 Friday, October 13, 2023 6:59 PM
3
Adjust the extension pipe by pressing the
length adjustment button
the pipe and sliding until it clicks into place at
the desired length.
• The extension pipe extends in four steps.
4
Press the Power button to activate the
Normal mode.
• To turn off the appliance, press the Power
button again.
Adjusting the Suction Power
Adjust the suction power using the suction power
adjustment button on the handle.
Power Button
a
• (A): Press the Power button to activate
Normal mode.
• (B): Press the Power button to activate
Power mode.
Suction Power Up (+) Button
b
• (A): Press the + button to increase the suction
power. (Normal
Power)
~
• (A): Press and hold the + button for more
than 3 seconds to activate Turbo mode from
either Normal or Power mode.
• (B): Press the + button to increase the suction
power. (Normal
Power
~
Suction Power Down (-) Button (Wi-Fi Mode)
c
• Press the - button to decrease the suction
power. (Turbo
~
Power
on the back of
d
NOTE
• For the longest run time, use the Normal mode.
Display
The handle of the appliance displays indicators for
clogged objects, filter cleaning alerts, appliance
connection status, and the remaining battery
charge.
a
b
c
d
Turbo)
~
~
Normal)
• Press and hold the - button for 3 seconds to
activate Wi-Fi and connect the appliance in
the LG ThinQ application.
Clogged Objects Indicator
• This indicator lights up when the interior of
the product body, extension pipe, inlets,
nozzle, exhaust filter, pre-filter, or cyclonic
mesh filter is clogged with foreign objects.
• If clogging persists, the motor will cycle and
the appliance will shut off. Remove the
foreign objects and clean the exhaust filter,
pre-filter and cyclonic mesh filter following
the steps in the Removing Foreign Objects
section.
Filter Cleaning Cycle Alarm Indicator
• This indicator lights up when the appliance is
used for a certain period of time. Clean the
exhaust filter, pre-filter and cyclonic mesh
filter if necessary.
Wi-Fi Indicator
• This indicator blinks when the appliance is
connecting to the LG ThinQ application or
home Wi-Fi network, and the indicator lights
up when the connection is complete.
Battery Level Indicator
• The remaining battery level is displayed in 3
stages according to the remaining battery
power.
• The battery level indicator blinks when the
battery needs to be charged.
OPERATION
15
Advertisement
Table of Contents
