D-Link DIR-878 Quick Installation Manual page 46

DIR-878
Wireless Module Parameters
Advanced functions
Wireless connection rate
Transmitter output power
The maximum value of the
transmitter output
depends upon
frequency regulations applied
in your country
2 Maximum wireless signal rate is derived from IEEE standard 802.11ac and 802.11n specifications. In order
to get the rate of 800Mbps in the 2.4GHz band, a Wi-Fi client should support MIMO 4 x 4 and QAM256
modulation scheme. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower
actual data throughput rate. Environmental factors will adversely affect wireless signal range.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
2
·
·
·
·
·
·
·
power
the radio
·
·
·
Super Mesh function
Support of client mode
WMM (Wi-Fi QoS)
Information on connected Wi-Fi clients
Advanced settings
Smart adjustment of Wi-Fi clients
Guest Wi-Fi / support of MBSSID
Limitation of wireless network rate
Periodic scan of channels, automatic switch to least
loaded channel
Support of 802.11ac (5GHz) and 802.11n (2.4GHz) TX
Beamforming
Wider bandwidth (up to 160MHz)
Autonegotiation of channel bandwidth in accordance
with environment conditions (20/40 Coexistence)
CoovaChilli authentication portal
IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
IEEE 802.11b: 1, 2, 5.5, and 11Mbps
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
IEEE 802.11n (2.4GHz): 6.5–600Mbps (MCS0–MCS30)
to 800Mbps (QAM256)
IEEE 802.11n (5GHz): from 6.5 to 600Mbps (from MCS0
to MCS30)
IEEE 802.11ac (5GHz): from 6.5 to 1733Mbps (from
MCS0 to MSC9)
802.11a (typical at room temperature 25 °C)
15dBm at 6, 54Mbps
802.11b (typical at room temperature 25 °C)
15dBm at 1, 11Mbps
802.11g (typical at room temperature 25 °C)
15dBm at 6, 54Mbps
802.11n (typical at room temperature 25 °C)
2.4GHz
15dBm at MCS0, 7
5GHz
15dBm at MCS0, 7
802.11ac (typical at room temperature 25 °C)
15dBm at MCS0, 9
Quick Installation Guide
46