Electrical Requirements; Getting Started; Battery Charging; Product Usage - KitchenAid 5KKVR100 Owner's Manual

ELECTRICAL REQUIREMENTS

USB Adapter:
Input: 100–240 V~, 50–60 Hz, 0.5 A
USB Output: 5 VDC, 2 A
Recommended ambient charging temperature: 5-40°C
External Battery (Lithium-ion): 5KRB12
Nominal Voltage: 10.8 VDC
Maximum Voltage: 12 VDC
NOTE: If the USB Adapter does not fit fully in the power source, contact a qualified
electrician. Do not modify the USB Adapter in any way.
NOTE: Do not use or store batteries or products in locations where the temperature is less
than 10°C or more than 40°C.
LITHIUM-ION BATTERY OPERATED PRODUCT
DISPOSAL
Always dispose the Battery operated products according to federal, state, and local
regulations. Contact a recycling agency in your area for recycling locations.

GETTING STARTED

BEFORE FIRST USE
1.
Charge the Battery until it is fully charged.
2.
Clean all the parts and accessories (see "Care and Cleaning" section).
3.
Remove all packaging materials, if present.
NOTE: Some dust may be on the product. This is due to the recycled materials used in
packaging. This can be cleaned with a soft towel.

BATTERY CHARGING

USING THE USB CABLE
1.
Attach the USB Cable to the adapter. Connect the other end of the USB Cable to the
Battery.
2.
Plug the USB Adapter into a power source.

PRODUCT USAGE

IMPORTANT: Make sure the Battery is charged before using.
1. Make sure that the Power Button ( ) is off before attaching the Battery.
2.
Insert the Battery on the Battery slot located underneath of the appliance, make sure it is
aligned. The LED will light and display the Battery level for five seconds, then turn off.
3.
Insert the Filter and Screen Assembly into the Dirt Cup. Twist the Dirt Cup onto the
Vacuum Base to lock into place.
4.
Attach either the Crevice Tool or the Wide Angle Tool for cleaning.
5.
Press the Power Button ( ) to turn the unit ON at a normal speed and to active Boost
function press and hold the Boost Button.
6.
Release Boost Button to go back to normal speed and press the Power Button ( ) again
to turn the unit off.
7. Press and hold the Batttery Unlock Button to remove the Battery.
5