Control Box Installation
Installing the control box [DVM S Series]
1
Fasten the bracket to the to the control box's body using
the supplied screws. The bracket should be installed
on the left for Small DVM S Models and on the right for
Larger DVM S Models.
•
Installation in a small DVM S model
•
Installation in a large DVM S model
2
Mount the control box in the outdoor unit.
(in case of a large model, remove the screw from the
cover top, fold it up, and then perform installation.)
•
Installation in a small DVM S model
DB68-12029A-00_IM_ACC BASE HEATER Control KIT_AA_EN.indd 5
•
Installation in a large DVM S model
3
Fasten the control box to the outdoor unit with supplied
screws (3 EA) for assembly.
(in case of a large model, fold down the cover top and
then perform assembly.)
•
Installation in a small DVM S model
•
Installation in a large DVM S model
English
5
2022-09-06 오전 11:43:21