Sony KD-55A8F Service Manual page 75

4.6 WB data transfer
1. In "Panel/PQ" service mode
a. Go to "WB/Mura/CUC data transfer"
b. To select "WB/Mura/CUC data
To change data , press "←" or "→" on remote commander.
c.
category by "↑" or "↓".
transfer", press → button.
Disuse in CR model
Please apply Main board or panel is replaced.
Back
2. In "WB/Mura/CUC data transfer"
a. Select "WB/Gamma data
"↓" on remote commander .
b. To change the items, press "←" or "→" on remote
commander and press "Enter" button.
Selectable items are:
 0. SoC to T-con
 1. T-con to SoC
 2. No action
c. "Mura data transfer" and "CUC data transfer" are also
displayed on the menu, but Mura and CUC function
do not work on CR model. Please skip these items by
pressing "↓" on remote commander .
d. Select "[start]" and press "Enter" button to start
transfer.
<<
<[ 0.Soc to T-con ]>
<[ 0.Soc to T-con ]>
<[ 0.Soc to T-con ]>
[</>] Set [Home]Exit
transfer" by pressing "↑" or
75
SYS SET