Schematic Diagram - Panasonic SD-YD250 Manual

Parts Name/Mark
No.
1 Connector (upper)
2 Set mark
3 Mounting shaft unit
4 Screw hole
3. Insert screws and tighten.
Caution :
Do not forget to insert the rubber seal when assembling.
Also be sure not to twist this seal during assembly.
When replacing the shaft mounting unit, be sure to use a new
rubber seal (Packing) and three new screws.
The curing agent of the loose prevention is given to an unused
screw for the repair exchange.

3. SCHEMATIC DIAGRAM

20