Table of Contents
Advertisement
Note: Due to unceasing modification of our products, your
refrigerator may be slightly different from this instruction
manual, but its functions and using methods remain the
same. To get more space in the freezer, you can remove
drawers (except lower freezer drawer).
Display controls
Use your appliance according to the following control
regulations, your appliance has the corresponding functions
and modes as the control panels showed in the pictures below.
When the appliance is powered on for the first time, the
backlighting of the icons on display panel start working. If no
buttons have been pressed and the doors are closed, the
backlighting will turn off.
Controlling the temperature
We recommend that when you start your refrigerator for the
first time, the temperature for the fridge is set to 4 C, my fresh
choice to - 12 C and the freezer to - 18 C. If you want to
change the temperature follow the instructions below.
Caution! When you set a temperature, you set an average
temperature for the whole refrigerator cabinet. Temperatures
inside each compartment may vary from the temperature
values displayed on the panel, depending on how much food
you store and where you place it. Ambient temperature may
also affect the actual temperature inside the appliance.
1. Fridge
Press "ZONE" repeatedly until "Fridge" icon lights up and then
press
"TEMP."
temperature between 8 C and 2 C, the temperature will
repeatedly
to
set
your
desired
fridge
Advertisement
Table of Contents
