Safety Precautions Please read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, refer to the section “Warnings and Precautions” in Safty Information. Do not switch on your phone when it is prohibited to use mobile phones or when the phone may cause interference or danger.
Page 4
Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them. Do not put your phone in a high- temperature place or use it in a place with flammable gas such as a gas station.
1. Introduction Your phone can operate in virtually all countries, automatically switching between WCDMA 2100 and GSM/GPRS 900/1800/1900 networks. The services supported by your phone should be NOTE: also supported by the network from where you use the phone. For details, contact your service provider. Your Phone Appearance and Keys...
Page 6
Your Phone 1. Charger 2. Headset 3. Earpiece connector/ Cable Jack connector 4. Left function 5. Send key 6. Music key 7. Scroll key 8. Clear key 9. Power/End 10. Right function 11. OK key 12. Volume keys 13.Internal Camera Left Active the function indicated at the left of function...
Page 7
Your Phone • Scroll through a menu. Scroll key • Access the corresponding shortcut menu in standby mode. Right Active the function indicated at the right function of the prompt bar. Clear key Delete a character before the cursor. • End an ongoing call or reject an Power/ incoming call.
Page 8
Your Phone The icon bar displays the phone status. The following table illustrates the icons that may appear on this bar. Indicates signal The normal profile strength. is activated. Indicates power The headset is level of the plugged in. battery. The phone is Your PC connects currently in a...
SIM Card and Memory Card Forwarding all You have new incoming voice Emails. calls to line 1 or line 2. The phone is in You have new a call. PUSH messages. Alarm clock is enabled. SIM Card and Memory Card Load your SIM card before using your phone.
Charging the Battery 1. Remove the battery 2. Install the SIM card. cover. 3. Install the memory 4. Install the battery. card (Optional) . Your phone supports a memory card (microSD) with a capacity up to 8 GB. Charging the Battery Before charging the battery with a cable charger, ensure that the battery has been properly loaded into your phone.
Text Input The plug of the charger is in trapezium shape. NOTE: Reversely inserting the plug may damage the mobile phone and charger. Text Input While entering text: NOTE: • Press the * key to switch between input methods. Press and hold the * key to enable or disable the T9 input mode.
Text Input Number Input Method In a text editing screen, press and hold the character/number keys to enter corresponding numeric characters. You can also press successively the * key to switch to the "123" numeric input method, and enter corresponding numeric characters by pressing the character/number keys.
2. Calls Function Creating a Contact To add a new contact, perform one of the following operations: • Enter a number in standby mode, and then select options to create a new contact. • Select Contacts > Add new contact. •...
Answering or Rejecting a Call During a call, you can select Options to perform operations in the option list. Press the End key to terminate the call. Answering or Rejecting a Call You can set the answer mode in Settings/Call settings.
3. Message Function Message Sending a Message Select Messaging > Create message to access the message editing screen. During editing a message: • You can press down scroll key to add attachment files. • You can select Options to perform operations in the option list.
Email Email Sending an Email Select Messaging > Email > Create Email to access the email editing screen. Select To and press OK key. Enter recipient or add recipient from contacts. In the email editing screen: • Select Subject to edit the contents. •...
Connect your phone with a PC through USB cable delivered with your phone. The PC Options software supplied on your phone will run automatically Select PC Assistant button to perform the USB-Based Synchronization operation; select HUAWEI Mobile Connect via the phone to perform the USB-Based...
® Bluetooth Internet access operation; and select File Transfer to perform the microSD Card reader operation. For the first time, follow the guide to complete the installation. NOTE: • If the PC cannot recognise your phone when connecting through the USB cable, power off and restart the PC and then retry.
® Bluetooth Install the PC Assistant supplied on your phone. Select Settings > Connectivity > Bluetooth > Switch On/Off > On to enable the Bluetooth function. Run the driver software for Bluetooth on the PC, and pair the phone. After the PC detects and recognizes the phone serial port service, activate the Bluetooth serial port service on the phone.
5. Other Functions Music During music playing, you can select Options to perform the operations in the list or follow the displayed prompts and use the scroll key to perform corresponding operations. FM Radio Connect the headset to your phone and select Music >...
6. Important Information Ambient Temperature Keep the ambient temperature between -10 ℃ and 45 ℃ while the device is being charged. Keep the ambient temperature between -10 ℃ to 45 ℃ for using the device powered by battery. Certification Information (SAR) This mobile device meets guidelines for exposure to radio waves.
Disposal and Recycling Information The SAR limit also adopted by Europe is 2.0 W/kg averaged over 10 grams of tissue. The highest SAR value for this device type when tested at the ear is 0.889W/kg, and when properly worn on the body is 0.681W/kg. Disposal and Recycling Information This symbol on the device (and any included...
FCC Statement (RoHS) Directive (Directive 2002/95/EC of the European Parlia- ment and of the Council). For more information about the REACH compliance of the device, visit the Web site www.huaweidevice.com/certification. You are recommended to visit the Web site regularly for up-to-date information. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC...
Warning: Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device. EU regulatory conformance Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.