Table of Contents
Advertisement
STS-(3000K, 6000K)-H1 Smart Transformer Station
(Spain, Eiffage Turroneros)
Installation Guide
Figure 7-13 Access of two rows of cables
Step 3 Fill the rubber insulation layer removed when preparing the cables between the cables and the
cable clips to ensure that the cables are securely connected.
Figure 7-14 Securing cables
If the cables are not securely connected, the ring main unit may be damaged, causing gas leakage.
Step 4 Seal the bottom cable hole using firestop putty, clear the cable room sundries, and close the
door.
----End
Issue 02 (2020-02-21)
Copyright © Huawei Technologies Co., Ltd.
7 Connecting Cables
57
Advertisement
Table of Contents
