6.
Remove the filter by using a socket to turn it
counterclockwise.
Figure 24
1. Fuel filter
7.
Clean the filter using kerosene or a similar
solvent.
Note:
Replace the filter if it is extremely dirty
or torn.
8.
Install the filter by using a socket to turn it
clockwise.
9.
Connect the hose to the filter and secure it using
the hose clamp.
10.
Install the fuel tank and secure it using the 3
bolts previously removed.
11.
Install the muffler and secure it using the 2 bolts
previously removed.
12.
Add fresh fuel to the engine. Check for leaks
before starting the engine.
Blade Maintenance
Replacing the Blade
Replace the blade whenever it is worn or damaged.
1.
Refer to
Preparing for Maintenance (page
2.
Replace the blade as shown.
g360644
1. Spacer
2. Blade-clamp washer (2)
21
Figure 25
3. Blade
4. Nut—M14
17).
g386911