Related Manuals for LG 27KC3PK-CW
Summary of Contents for LG 27KC3PK-CW
- Page 1 OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. 27KC3PK-CW www.lg.com Copyright © 2022 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY INSTRUCTIONS ....3 - Safety Notes for Power and AC Adaptors ..4 - Precautions When Moving the Product ..6 - Installation Precautions ........... 7 - Precautions When Cleaning Product ....9 - Precautions When Using Product ....10 - Screen Afterimage Cautions ...... -
Page 3: Safety Instructions
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY INSTRUCTIONS The following safety instructions are to prevent accidental damage or personal injury by guiding the users to use the product safely and correctly. -
Page 4: Safety Notes For Power And Ac Adaptors
Safety Notes for Power and AC Adaptors WARNING • For power cords and AC adapters, use the proper product supplied by the manufacturer or an approved standard product. If you wish to use another power cord, ensure it meets the national standards. If the power cord is defective, contact the manufacturer or the nearest authorised service centre for replacement. - Page 5 • If water or any foreign substance enters the product, disconnect the power cord immediately and contact the service centre. - Product damage may result in fire or electric shock. • Keep the power cord and AC adaptor away from heating devices. - The casing of the wires may melt, causing fire or electric shock.
-
Page 6: Precautions When Moving The Product
Precautions When Moving the Product WARNING • Please make sure to contact the service centre before moving the product. - Otherwise, it may result in electric shock or damage to the product. • Turn off the power and make sure all connected cables are disconnected before moving the product. - Otherwise, it may result in electric shock or damage to the product. -
Page 7: Installation Precautions
Installation Precautions WARNING • Please make sure to contact the service centre before installing the product. - Otherwise, it may result in electric shock or damage to the product. • Do not drop or apply excessive force to the product. Keep the product out of reach of children. Do not throw toys or objects onto the product panel. - Page 8 CAUTION • Do not install the product in a place with electromagnetic interference. • If the product is installed in a special place other than the normal conditions of use, serious problems may occur in image quality, lifespan, and appearance due to the influence of the surrounding environment. Please make sure to check with our service personnel before installation.
-
Page 9: Precautions When Cleaning Product
Precautions When Cleaning Product WARNING • Always keep the product and inside of the product clean. - If you do not clean the product, dust will accumulate inside and may create a fire hazard or damage to the product. • Contact the service centre for internal cleaning of the product. -
Page 10: Precautions When Using Product
Precautions When Using Product WARNING • Do not use the product in any environment that exceeds the temperature or humidity limits. - Otherwise, it may result in electric shock or damage to the product. • If you are using the product for a long time, take occasional breaks to protect your eyesight. - Otherwise, your eyesight may be weakened. -
Page 11: Screen Afterimage Cautions
• Do not use high voltage products near the device. (electronic mosquito swatter, etc.) - Electric shock could cause the device to malfunction. • In the event of a gas leak, never touch the socket and open windows for ventilation. - Otherwise, it may cause electric shock or fire. -
Page 12: Assembling And Preparing
ASSEMBLING AND PREPARING CAUTION • Please refrain from using counterfeit components to ensure safety durability of the product. • The product warranty will not cover damage or injury caused by the use of counterfeit components. • There is no control unit in the drawer and back cover. Please be aware that it can be opened by a general user. NOTE •... -
Page 13: Kiosk Module Location And Name
Kiosk Module Location and Name Colour and shape may vary depending on the product, and specifications are subject to change without notice to improve performance. - Page 14 Item Explanation Display Displays the kiosk map screen. Kiosk Enclosure Mounts each module and equipment. QR / Barcode Reader It is a sensor for QR / barcode recognition. • Optimal operating conditions - Distance from the sensor: 100 ~ 150 mm - Barcode length: 30 ~ 60 mm - QR code size: Width: 22.3 mm...
-
Page 15: Check Before Installing The Product (User Installation Guide)
Remove the protective tapes (6 pieces) attached to the left and right. Ventilation Requirements • Free 100 mm of space from each side and wall for ventilation. • For more information, contact the LG Electronics Service Centre. 100 mm 100 mm 100 mm 100 mm... -
Page 16: Securing The Bottom Screws To Prevent Overturning
Securing the Bottom Screws to Prevent Overturning Standard Screws Quantity 258 mm 117.5 mm... - Page 17 (Optional) • This is a securing method using the internal hole of the product when the lower part cannot be fastened. • Refer to the next page for the fastening positions. Standard Screws Quantity 120 mm 170.3 mm 115 mm...
-
Page 19: Organising Lan Cables And Power Cables
Organising LAN Cables and Power Cables Open the drawer front. Remove the back cover. Back cover... - Page 20 Disassemble the screw. Fix the power and LAN cables in the cable holder. Put the screw back into the set. Screw Cable holder...
-
Page 21: Using The Printer
Using the Printer No need to install. (Serial communication enables immediate use without driver Driver installation.) The printer settings are set at the time of shipment from the factory. Printer Setting Use it only when you want to use a setting other than the default setting. - Install the program : Hwasung Memory Setting.exe Please develop the program by referring to the example code. -
Page 22: Using The Barcode Scanner
Using the Barcode Scanner No need to install. (Factory installed.) Driver Please install it in case of unavoidable reinstallation such as driver deletion. - Driver : Zebra_CoreScanner_Driver_(64bit)_v3.07.0008 Default Setting : USB HID Barcode information is output in the same way as keyboard input. No separate operation required. Interface If you need to use a communication method other than USB, refer to the technical document. -
Page 23: Using The Touch Monitor
Using the Touch Monitor Touch Monitor • The PC can be used by touching the screen as a PC input device instead of the keyboard and mouse. • The touch screen recognises the minute current of the human body (capacitive type), so it must be touched with the tip of the finger. -
Page 24: Shutting Down The System / Turning Off The Pc
Shutting Down the System / Turning Off the PC The Windows shut-down option can be used in the following ways: • Press the button and select [System Shut-down]. • Press the power switch button on the PC. - Page 25 CAUTION • Switching off incorrectly may result in product failure. (Failure to power on, blue screen, performance degradation, etc.) ※ Examples of switching off incorrectly include turning off the circuit breaker, turning off the extension lead, and pulling out the power plug during operation.
-
Page 26: Things To Check Before Reporting Abreakdown
THINGS TO CHECK BEFORE REPORTING A BREAKDOWN Ů Each model may have different points to check. Ů For more instructions on PC settings, please refer to Windows Help. Issues Related to Use • The power won't turn on. - Check if the power cord is correctly plugged into the power outlet. - For models using an AC adaptor, disconnect the AC adaptor, clean the contact terminals, and turn the power on again. - Page 27 Issues Related to Screen (Video) • The position of the screen is incorrect. - Check if the graphics card resolution and frequency are supported. If the frequency exceeds the supported range, use PC settings to set the resolution to the recommended value. •...
- Page 28 Other Issues • The power suddenly turned off. - Check if the auto-off feature is on. - Power supply is interrupted. Check if the power cord is correctly plugged into the power outlet. - Check the power control settings. Issues Related to Touch •...
- Page 29 Afterimage • After-image appears when the product is turned off. - Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen- saver function. - If a screen with colours with a large difference in luminance (black and white, grey) is output, an after-image may appear when the screen is switched to a dark screen.
-
Page 30: Product Specifications
* For Models with Speaker Support Only RMS audio output 2 W + 2 W (R + L) Audio 8 Ω Speaker impedance 27KC3PK-CW LCD Screen Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V) 100-240 V~ 50/60Hz 2.0 A Rating Power On Mode: 40 W (Typ.) - Page 31 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Temporary noise is normal when powering ON or OFF MODEL this device. SERIAL NO.