Table of Contents
Advertisement
2.5.5
Replacing the ASUS PCIE-NVME4-OCuLink card on
the riser card bracket (for RS700-E9-RS12 only)
The ASUS PCIE-NVME4-OCuLink card pre-installed on the riser card bracket on the PCIE1
allows your server system to support NVME storage devices on Bay 9 to Bay 12.
To replace an ASUS PCIE-NVME4-OCuLink card on the riser card bracket:
1.
Remove the OCuLink cables from its corresponding slots.
OCuLink port 2
OCuLink port 1
2.
Firmly hold the riser card bracket and ASUS PCIE-NVME4-OCuLink card assembly,
then pull it up to detach it from the PCIE x24 slot on the motherboard.
3.
Remove the screw from the metal
cover (A), then remove the ASUS
PCIE-NVME4-OCuLink card (B) from
the riser card bracket.
ASUS RS700-E9 Series
PCIE x24 slot
OCuLink port 4
OCuLink port 3
2-25
Advertisement
Table of Contents
