Sdd 2-Knife Trimmer Str6702 Specifications; Sdd Square Fold Sfm6904 Specifications - Canon varioPRINT 120 Customer Expectation Document

6.19.2 SDD 2-Knife Trimmer STR6702 Specifications

Item
Booklet
Size Minimum
39
(Length)
Maximum
Booklet Width (X)
Supported Paper
40
Weight
Maximum Booklet
Thickness
Trim Amount
Asymmetrical Trim
Booklet Staple Clearance
from Top/Bottom
(Minimal)
Speed
41
Power Source
Dimensions (H x W x D)
Weight
39 If a booklet's input height is greater than 12.60" (320 mm), it must be trimmed to 12.60" (320 mm) or
fewer inches (millimeters).

6.19.3 SDD Square Fold SFM6904 Specifications

Item
Supported Paper size
Supported Paper Weight
Speed
Power Source
Dimensions (H x W x D)
Weight
40 On booklets of approximately 20 sheets or more, always use cover sheets that weigh 120 g/m2 or heavier to
prevent trimming deviations.
41 Can only be connected to an approved electrical system, which is rated at a maximum of 16 A, and is protected
by circuit breakers.
Version 13
Before Trimming
8.07" (205 mm)
13.4" (340 mm)
Approximately 2" to 9.6" (50 mm to 245 mm)
16 lb bond to 110 lb cover (60 to 300 g/m
Trimming: Up to 0.2" (5 mm)
Bypass: Up to 0.23" (6 mm)
Approximately 0.08" to 1.38" (2 mm to 35 mm) each side
Approximately ±0.59" (±15 mm)
Approximately 1.57" (40 mm)
LTRR: Up to 1,800 booklets/hour
11" x 17": Up to 1,800 booklets/hour
From the SDD BLM300C Professional Booklet Maker
Operational:
(1,110 mm x 600 mm x 700 mm)
On Pallet in Box: 61 7/8" x 47 1/4" x 31 1/2"
Operational:
On Pallet in Box: Approximately 595.2 lb (270 kg)
LTRR, 11" x 17", 12" x 18", Custom Sizes: 5.5" x 9.76" (140 mm x 248 mm)
to 12.6" x 18.5" (320 mm x 470 mm)
16 lb bond to 110 lb cover (60 to 300 g/m
LTRR: Up to 1,800 booklets/hour
11" x 17": Up to 1,800 booklets/hour
From the SDD BLM300C Professional Booklet Maker
Operational:
(1,110 mm x 360 mm x 600 mm)
On Pallet in Box: 23 3/8" x 47 1/4" x 31 1/2"
Operational:
On Pallet in Box: Approximately 220.5 lb (100 kg)
varioPRINT 120 Customer Expectations Document
varioPRINT 120 Customer Expectations Document
Specifications
Bypass
5.9" (150 mm)
12.6" (320 mm)
2
)
43 3/8" x 23 5/8" x 27 1/2"
(1,570 mm x 1,200 mm x 800 mm)
Approximately 451.9 lb (205 kg)
Specifications
2
)
43 3/8" x 14 1/4" x 23 5/8"
(720 mm x 1,200 mm x 800 mm)
Approximately 143.3 lb (65 kg)
Trimmed
7.9" (200 mm)
12.6" (320 mm)
Page 49