Remaining Battery Power-Display - Sharp Internet ViewCam VN-EZ1U Operation Manual

5
Composing the image on the LCD monitor, adjust the
angle of the lens body.
6
Press the Shutter button to set the timer.
The Timer indicator appears to flash in black and red
alternately until the start time is reached.
The Shutter will be released automatically 10 seconds
after the Shutter button is pressed.
To cancel the Self-Timer recording, press the MENU
button.
Notes:
• Do not turn off the power or change the mode once the
Timer indicator appears.
• Whenever the Self-Timer recording finished, the Self-Timer
mode returns to "OFF". Turn the Self-Timer "ON" every time
you want to record images with it.

Remaining Battery Power-Display

The Battery power indicator appears on the LCD monitor
whenever the power is on. It suggests remaining battery
power in 5 levels, as shown below. When the battery power
is very low, replace all four batteries with new ones
immediately.
(green)
If the battery is almost dead, the Battery power indicator
flashes on the blued LCD monitor screen until the power is
turned off five seconds later.
Timer indicator
Notes:
• Use the Battery power indicator only as an indication.
• Battery consumption may vary depending on the operating
conditions.
• The Battery power indicator may not work properly for
nickel cadmium (Ni-Cd) rechargeable batteries.
Basic Operations
(green) (yellow) (red)
Warns
by flashing
28