Hitachi airPoint Room700 Operation Manual page 27

5.5.1 Schedule Day and Time Setting
NOTE:
•
indicates that schedule control is not possible.
Refer to "6.1 Adjusting Date/Time" to set the date and time.
1. Set the schedule day and time
Step1. Select "Power Saving/Night Quiet Schedule" on the
"Function Menu" screen and press "OK".
•
If the sub remote controller or indoor unit does not
support power savings, the power saving schedule
setting screen for intermittent control (Step3) is
displayed.
Step2. Press " " or " " to select the desired items, and then
press "OK". The items are changed as follows:
"Capacity Control" ↔ "Intermittent" ↔ "Night Quiet
Operation".
•
If the current time is not set, the "Adjusting Date/
Time" setting screen is displayed.
•
If no schedule or holiday has been set, Step4 is
displayed.
Step3. Press " " or " " to select the schedule day and time
settings, and then press "OK".
Step4. Select the day of the week (from Mon. to Sun.) to be set
with " " or " ", and press "OK".
•
•
To copy the setting contents of the previous day, press
" " and "OK" simultaneously.
Step5. Press" " or " " to select schedule timer No. 1 to No.5,
and press " " or " " to select "ON Time" ↔ "OFF Time" ↔
"Level"↔ "
and "Level" can be set.
•
Five different schedule timers (maximum) can be set
for each day of the week.
•
Press "OK" to display the schedule time setting screen
for the next day of the week.
•
Select "
"ON / OFF Time" and "Level".
Press " " to return to Step4.
A16381H9HL
(run) and (stop) is displayed on the LCD.
". By pressing " " or " ", "ON / OFF Time"
" and press "OK" to delete the setting of
5. Function Menu Screen Display
Function Menu
Simple Timer
Operation Schedule
Power Savings Setting
Night Quiet Operation
Power Saving/Night Quiet Schedule
OK Select
Power Saving/Night Quiet Schedule
Capacity Control
Intermittent Control
Night Quiet Operation
Set when schedule is used.
* Power Savings mode setting activated too.
OK Select
Intermittent Control
Verify Intermittent Control Schedule
0 6 12
Mon
ON Tue
Wed
Thu
Turn OFF
Fri
Sat
Schedule
Sun
OK Select
Intermittent Control
0 6 12
Mon
Tue
Wed
Thu
Fri
Sat
Sun
OK Select
Monday Schedule
ON Time OFF Time
1 08 : 00 ~ 10 : 00
2 10 : 00 12 : 00
~
3 12 : 00 ~ 14 : 00
4 14 : 00 ~ 16 : 00
5 16 : 00 ~ 18 : 00
Press Up and Down to adjust
Conference Room
20 C
Cleaning Filter
Out of temp. range
FrostWash stops
OFF
Sav:Low | Main
26
.5
Temp
Indicates that schedule control is in
operation.
(Mon) 16:30
Back
(Mon) 16:30
Back
(Mon) 16:30
18
Back
(Mon) 16:30
18
Back
(Mon) 16:30
Level
LOW
MED
HIGH
MED
LOW
Back
AC off in 0.5 hrs
Priority
25