Contents safety warnings ........................4 unpacking ..........................6 installation ........................... 7 location ..........................7 levelling the unit ....................... 7 free space requirements ....................7 installing the door handles ....................7 reversing the door swing ....................8 cleaning before use ......................11 before using your unit .....................11 product overview ......................
safety warnings For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. • Read all instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party, make sure to include this manual.
Page 5
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. • Do not store bottles or glass containers in the freezer compartment. Contents can expand when frozen (fizzy drinks) which may break the bottle and damage your freezer compartment.
Thank you for purchasing your new Kenwood Fridge Freezer. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this installation/instruction manual in order that you fully understand all the operational features it offers.
installation installation location When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated with an average room temperature of between 10°C and 43°C. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption.
installation reversing the door swing tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner • Ensure the unit is unplugged and empty. • To take the door off it is necessary to tilt the unit backwards. You should rest the unit on something solid, e.g.
Page 9
installation 3. Remove the middle hinge. Lift the lower door and place it on a padded surface to prevent from being scratched. 4. Remove the screw and stop block from the bottom of the lower door and move it to the opposite side.
Page 10
installation 7. Screw the levelling feet fix board, bottom hinge and levelling feet tightly on their new position. 8. Stand the unit. Remove the middle hinge hole covers and swap their position with the middle hinge. Reverse the middle hinge. 9.
installation 11. Cover the upper hinge with the upper hinge cover. 12. Transfer the door handles to the other side of the doors accordingly. Remove the 2 door screw hole covers from the other side of the door and swap their position with the door handles.
product overview main unit Control Panel Fridge Door LED Light Shelf (with cover) Fridge Glass Shelf Fridge Door Shelf Water Tank Water Dispenser (the part inside Salad Bin the fridge door) Cover Shelf Salad Bin Freezer Drawer Bottle Stopper Egg Tray Wine Rack Ice Tray (recommend to hang...
operation switching on your unit 1. Connect the mains cable to the mains socket. The internal temperature of your unit is controlled by an electronic control panel. 2. Press repeatedly to set temperature for the fridge compartment (2 to 6°C) and press repeatedly to set temperature for the freezer compartment (-16 to -22°C).
before using the water dispenser Before using the water dispenser, clean the water tank first. 1. Take out the middle door shelf. 2. Take out the water tank by gripping it tightly on both sides, then keep pulling it upward and downward with some force until removed.
filling the water tank Open the small tank cover. Fill drinking water into the water tank through the hole. Close the cover after filling. • Do not fill above the level, otherwise, it may overflow. • Before filling with water, ensure that the water tank is steady and in a correct position.
noises inside the unit! You may notice that your unit makes some unusual noises. Most of these are perfectly normal, but you should be aware of them! These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has become more pronounced since the introduction of CFC free gases.
• You may also add the weight and cooking notes, e.g. “defrost first”, “cook from frozen” and keep a separate log of what is in each drawer. This will save opening the door and searching around unnecessarily. defrosting frozen food 1.
maintenance changing the internal LED light The internal light is an LED panel that cannot be changed by the user. Please contact a qualified service agent. care when handling / moving your unit Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by holding the edges of the top surface.
Brand Kenwood Model KNFD60B17 / KNFD60X17 Household Appliance Category Energy Efficiency Class Energy consumption 302 kWh per year, based on standard test results for 24 hours. Actual energy consumption will depend on how the appliance is used and where it is located.
Page 20
Need Help with your product? Your product is supported by Knowhow under a Trademark Licence from Fisher & Paykel Appliances Italy SpA. For help or spare parts please call us on: 0344 561 1234 The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste.