Sharp HT-SL70 Operation Manual
Sound bar home theater system
Hide thumbs
Also See for HT-SL70:
- Operation manual (21 pages) ,
- Quick start manual (1 page) ,
- Operation manual (17 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
MODEL
HT-SL70 / HT-SL75
SOUND BAR HOME THEATER SYSTEM
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP product.
HT-SL70 and HT-SL75 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
Notes:
●
This product is recommended for flat panel TV (LCD and plasma).
●
For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
●
This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV's CEC must be enabled. For detail, refer to the operation manual of the TV.
●
For TV without HDMI CEC, headphone or RCA (variable output) analogue connection is available.
●
For TV without HDMI, headphone or RCA (variable output) connection is required.
●
This unit supports HDMI which enables Audio Return Channel (ARC).
Recommended Connection:
TV Type
HDMI
( with ARC)
with HDMI
HDMI TV without
CEC & ARC or non
HDMI TV
TINSZB042AWZZ
OPERATION MANUAL
CEC FUNCTION
MUST BE ENABLED
MUST BE ENABLED
NONE
CONNECTION
HDMI IN
(ARC)
HDMI IN
HEADPHONE OUT
RCA
(VARIABLE OUT)
ENGLISH
CONNECTION METHOD
Page 11, Method 1
Page 11, Method 2
Page 12, Method 1
Page 12, Method 2
Printed in Malaysia
11K R MW 1
Advertisement
Table of Contents
Related Manuals for Sharp HT-SL70
Summary of Contents for Sharp HT-SL70
- Page 1 HT-SL70 / HT-SL75 SOUND BAR HOME THEATER SYSTEM Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-SL70 and HT-SL75 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
- Page 2 46" TV (short) x 1 for 52" TV (long) x 1 (GCOVAA300AW01) (GCOVAA302AW01) The illustrations printed in this operation manual are for the model HT-SL70. Audio Cable x 1 (QCNWGA062AWPZ) Speaker Wire Sound Bar Stand x 2 For HT-SL75 only:...
-
Page 3: Special Notes
Special Notes CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”... -
Page 4: Important Safety Instructions
Important Safety Instructions Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. -
Page 5: For U.s Customer Only
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. - Page 6 SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
-
Page 7: Controls And Indicators
7. Speaker Terminal......10 8. Audio In (TV) Terminal ....12... -
Page 8: System Preparation
System preparation Make sure to unplug the AC power cord before installing the unit or changing the position. Select from three installation methods according to the preferred position. 1. Using stand (horizontal arrangement) For 52", 60" or 70" TV sound bar assembly Use Sound bar cover joint (short : 369 mm) for 60"... - Page 9 System preparation (continued) 2. Using stand (vertical arrangement) For model Use sound bar stand cover : 10 - 2/16" (257 mm). HT-SL75 Use stand base : 13 - 7/32" (336 mm). For model Use sound bar stand cover : 6 - 3/32" (155 mm). HT-SL70 Use stand base : 6 - 15/16"...
-
Page 10: Falling Prevention
Do not let children dangle on the sound bar once it is attached on the wall as it can cause damage and injury. Driving screws SHARP designed the sound bar so you may hang them on the wall. Use proper screws (not supplied). See below for size and type. -
Page 11: Placing The System
Placing the system Installation image: DVD player BD Player Place the system as shown. Remove the protective film covering the sound bar and subwoofer before using the system. System connections Make sure to unplug the AC power cord before making any connections. Subwoofer AC outlet AC 120 V ~ 60 Hz... - Page 12 For details, refer to the operation manual of the TV. ● If you are unable to select external speaker setting from the TV menu (E.g. For Sharp LCD TV, it is named as AQUOS AUDIO SP), turn the CEC OFF and ON again.
- Page 13 To control the volume, some setting in the TV MENU is needed. For details refer to the operation manual of the TV. Example: Go to the Setting Menu of the TV, select AUDIO OUT and choose VARIABLE. However if this does not work, please use method 1.
-
Page 14: General Control
This is normal. ● “AQUOS speaker is enabled” message will be displayed if SHARP LCD TV does not detect HT-SL70 / HT-SL75 during power on. However the message “AQUOS audio with AQUOS LINK is enabled” will be displayed soon as HT-SL70 / HT-SL75 is detected. -
Page 15: Troubleshooting Chart
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. General Symptom Possible cause ●... -
Page 16: Specifications
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There maybe some deviations from these values in individual unit.