en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
Page 6
en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
Page 8
en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk.
en Preventing material damage If the water pressure is too high or 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least ATTENTION! 30 kPa (0.3 bar) and max.
Environmental protection and saving energy en Set the maximum spin speed if you 3 Environmental protec- want to dry the laundry in the tumble tion and saving energy dryer afterwards. a The drier the laundry, the shorter the programme duration when dry- 3.1 Disposing of packaging ing which, in turn, reduces energy consumption.
en Installation and connection Remove any packaging and pro- ¡ Water inlet hose tective covers completely from the → "Connecting the water inlet appliance. hose", Page 14 → "Disposing of packaging", 4.3 Requirements for the in- Page 11 stallation location Check the appliance for visible damage. Open the door.
Installation and connection en Pull the hoses out of the holders. Installation loca- Requirements tion Wooden joist Place the appli- floor ance on a water- resistant wooden board (minimum thickness of 30 mm) which is screwed tightly to the floor. Kitchen unit Only install the appliance under- neath a continu-...
en Installation and connection Remove the 4 sleeves. 4.5 Connecting the appliance Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). Push the 4 cover caps downwards. Open the water tap carefully and check that the connection points are tight.
Installation and connection en Note: Observe the draining heights. 4.6 Aligning the appliance The draining heights are: minimum: In order to reduce noise and vibra- 60 cm, maximum: 100 cm tion and to prevent the appliance Siphon Secure the con- from moving, align the appliance cor- nection point with rectly.
Page 16
en Installation and connection Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight. In doing so, hold the foot tight and do not adjust its height.
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain Transit bolts → Page 13 pump → Page 34 Door...
en Familiarising yourself with your appliance Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash and soaking 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 30...
first time en Add washing powder that contains first time 6 Before using for the a bleaching agent to compart- ment II. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry.
en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Recommendation for the maximum load capacity for the selected program in kg. - 1400 Set spin speed in rpm.
Page 21
Display en Display Description Spin Programme status Program end Programme status ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ance has been operated. → "Deactivating the childproof lock", Page 32 The crease-reduction function is activated. → "Buttons", Page 24 Additional rinse cycle is activated.
Page 22
en Display Display Description Flashes: The voltage control system has paused the pro- gramme due to impermissible voltage drops. Note: The programme continues when the voltage is per- missible again. ¡ Lights up: The door is locked and cannot be opened. ¡...
Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information Start/ Pause ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause Speed Perfect ¡ Activate Activate or deactivate a shorter pro- gramme duration.
en Buttons Button Selection More information Pre-treatment (Prewash) Selecting activates the Prewash ¡ programme. (Soaking) ¡ Prewash for washing heavily soiled laundry. Selecting activates the Soaking programme. Before the main wash cycle starts, the laundry remains in the water for longer.
Page 25
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cottons Wash hard-wearing items made of cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate ...
Page 26
en Programmes Programme Description Max. load (kg) Delicates / Wash delicate, washable items made from silk, vis- Silk cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag. Programme setting: ¡...
Page 27
Programmes en Programme Description Max. load (kg) Shirts Wash non-iron shirts and blouses made from cot- ton, linen, or synthetic or blended fabrics. Tip: In order to avoid creasing in your laundry, you can activate Anti Wrinkle. The laundry is only given a short spin and can be removed while still dripping wet.
Page 28
en Programmes Programme Description Max. load (kg) Note: The drum cleaning indicator flashes to re- mind you if you have not used a programme at 60 °C or higher for a long time. Quick 15/ 30 Wash items made from cotton, or synthetic or blen- ded fabrics.
Accessories en 10 Accessories Use original accessories. These have been made especially for your appliance. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx. 2.50 m). Fixing brackets Improves the stability of the appliance. WMZ2200 Elbow Secure the water outlet hose in place.
en operation ¡ Do not use color-bleaching agents Requirements in the appliance ¡ The laundry is prepared and sor- ted. → "Laundry", Page 29 ¡ The drum is empty. operation 13 Basic operation Open the door. operation Place the laundry in the drum. 13.1 Switching on the appli- Close the door.
operation en Pull out the detergent drawer. 13.6 Use the measuring aid Pour in detergent. for liquid detergent → "Detergent drawer", Page 17 To add liquid detergent, you can use If required, add the care product. a measuring aid in the detergent Push in the detergent drawer. drawer.
en Childproof lock – If the water level is high, start 14 Childproof lock the programme or select a suit- able programme for draining. Secure your appliance against being → "Programmes", Page 25 operated unintentionally using the Remove the laundry. controls. → "Unloading the laundry", Page 32 14.1 Activating the childproof lock...
Cleaning and servicing en Press down on the insert and re- 15 Cleaning and servi- move the detergent drawer. cing To keep your appliance working effi- ciently for a long time, it is important to clean and maintain it carefully. 15.1 Cleaning the drum CAUTION Risk of injury! Permanently washing at low temper-...
en Cleaning and servicing Fit the insert and click it into place. Open and remove the mainten- ance flap. Clean the opening for the deter- gent drawer. Slide a sufficiently large container under the opening. Push in the detergent drawer. Take the drain hose out of the holder.
Page 35
Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 34 hot. Since water may remain in the Do not touch the hot detergent ▶...
Page 36
en Cleaning and servicing Insert the pump cap. Insert and close the maintenance flap. Ensure that the parts of the ‒ pump cap are correctly as- sembled. Before the next wash To prevent unused detergent from Screw the pump cap as far as it flowing straight into the outlet in the will go.
Troubleshooting en 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 38
en Troubleshooting Fault Cause and troubleshooting "E:36 / -10" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
Page 39
Troubleshooting en Fault Cause and troubleshooting lights up. The temperature is too high. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 31 ▶ Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 25 flashes. Door is not closed. Close the door.
Page 40
en Troubleshooting Fault Cause and troubleshooting The programme does You have not pressed Start/ Pause. not start. Press Start/ Pause. ▶ Door is not closed. Close the door. ▶ Childproof lock is activated. Deactivate childproof lock. ▶ → "Deactivating the childproof lock", Page 32 Laundry is caught in the door.
Page 41
Troubleshooting en Fault Cause and troubleshooting The water is not drain- Unapproved extension installed on the water drain ing. hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
Page 42
en Troubleshooting Fault Cause and troubleshooting No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶ Do not add any extra water to the appliance while it ▶ is operating. Drum jerks after the This is caused by an internal motor test.
Page 43
Troubleshooting en Fault Cause and troubleshooting The spin programme Ensure that the drain pipe and water drain hose are ▶ does not start. not kinked or trapped. The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distrib- uted.
Page 44
en Troubleshooting Fault Cause and troubleshooting The spin result is not A low spin speed is selected. satisfactory. The laun- The next time you run a wash cycle, set a higher ▶ dry is too wet/too spin speed. damp. Start the programme. ▶...
Page 45
Troubleshooting en Fault Cause and troubleshooting Water is leaking out at Water outlet hose is not connected correctly. the water outlet hose. Connect the water outlet hose correctly. ▶ → "Water outlet connection types", Page 14 Odours have formed Humidity and detergent residue may promote the in the appliance.
en Transportation, storage and disposal 16.1 Emergency release 17.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 34 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
Handling Rules 2022. Valuable raw materials can be re- used by recycling. ¡ Please visit our web- site https:// WARNING www.bosch-home.in/ Risk of harm to health! metapages/e-waste- Children can lock themselves in the management to find appliance, thereby putting their lives out more details re- at risk.
The contact details for Customer Ser- vice can be found in the enclosed Customer Service directory or on our website. Helpline no.: 1800-266-1880 (Monday to Saturday – 8 am to 8 pm) Email ID: service.in@bosch- home.com Chat with us (WhatsApp): +91-8451000555...
Consumption values en 19 Consumption values The indicated consumption values are approximate. The values may deviate from the indicated values depending on water pres- sure, water hardness, water inlet temperature, room temperature, type of laun- dry, amount and soiling of laundry, detergent used, fluctuations in the mains voltage and selected settings.
Page 50
en Technical data Water pressure ¡ Minimum: Length of the wa- 150 cm 30 kPa ter inlet hose (0.3 bar) Length of the wa- 150 cm ¡ Maximum: ter outlet hose 1000 kPa Length of the 160 cm (10 bar) power cord...
Page 52
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.