Reset All - Philips 24PHG4032/77 User Manual

6. For Internet Explorer: Using a file
archiver, extract autorun.upg from the
downloaded ZIP file. Do not copy or place
the extracted file into a folder.
6. For Safari: When the download is
complete, autorun.upg is automatically
extracted from the ZIP file to your computer.
Copy the file to the USB flash drive. Do not
copy or place the file into a folder.
7. Eject and disconnect the USB flash drive
from the computer.
Upgrade the TV software
Caution:
•
Do not switch off the TV or remove
the USB flash drive during the software
upgrade.
• If a power failure occurs during the
upgrade, do not remove the USB flash
drive from the TV. The TV continues
the upgrade as soon as power is
restored.
• If an error occurs during the upgrade,
retry the upgrade from the beginning. If
the error reoccurs, contact Philips TV
Consumer Care.
1. Remove all USB devices such as a Wi-Fi
adapter from the TV and turn off your TV.
2. Connect the USB flash drive to the TV.
Follow the instructions on screen.
3. Switch on the TV.
4. Wait confirmation of new software
version on screen and follow the
instructions.
Note:
• Before you restart the TV, disconnect
the USB flash drive from the TV.
•
To prevent accidental updates to the
TV software, reconnect the USB flash
drive to your computer and delete
autorun.upg.

Reset all

You can reset all picture and sound settings
and reinstall all TV channels on your TV.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [Reinstall TV], then press OK.
3. Follow the onscreen instructions.
EN 23