Technical description
3.1
General technical description
The adapters are intended for the mounting of IEC standard motors or SIEMENS servomotors.
The adapters are equipped with grease-lubricated roller bearings. The bearings are
permanently lubricated.
The adapters are made of aluminum or gray cast iron.
3.2
Maximum permissible operation
Please observe the maximum values specified on the rating plate. Explanation in BA 2030
(2KJ4), General technical data.
3.3
Flexible coupling
Generally use a flexible coupling for the gearbox input and output.
If a rigid coupling or other input or output elements are to be used that give rise to additional
radial and / or axial forces (for example gear wheels, belt pulleys), this must be contractually
agreed.
Refer to the relevant operating instructions for details of how to use the coupling.
BA 2039 (2KJ4)
Operating Instructions, 12/2022, A5E50009089A/RS-AJ
3
21