Miele TXD 160 WP Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. TXD 160 WP
  6. Operating instructions manual
Miele TXD 160 WP Operating Instructions Manual

Miele TXD 160 WP Operating Instructions Manual

Heat-pump dryer
Hide thumbs Also See for TXD 160 WP:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
Heat-Pump Dryer
It is essential to read these operating instructions before installing,
starting up, and using the appliance. This prevents both personal
injury and damage to the appliance.
en-US
M.-Nr. 12 303 020

Advertisement

Table of Contents
loading

Related Manuals for Miele TXD 160 WP

Summary of Contents for Miele TXD 160 WP

  • Page 1 Operating Instructions Heat-Pump Dryer It is essential to read these operating instructions before installing, starting up, and using the appliance. This prevents both personal injury and damage to the appliance. en-US M.-Nr. 12 303 020...

  • Page 2: Table Of Contents

    How the control field works................. 16 Energy-saving tips..................... 18 Functioning of the heat-pump dryer..............19 Initial set-up ....................... 20 Miele@home ......................20 Downtime after installation.................. 21 1. Notes on correct laundry care ..............23 Points to note regarding washed laundry............23 Preparing the laundry before drying..............
  • Page 3 Contents Program chart....................32 Changing the program sequence ..............36 Changing a program once it has started............. 36 Adding or removing laundry ................36 Condensed water container ................37 Emptying the condensed water container ............37 Fragrance flacon....................38 FragranceDos ...................... 38 Removing the protective seal from the fragrance flacon........
  • Page 4 Contents IMPORTANT SAFETY INSTRUCTIONS ............60 Installation......................62 Front view ......................62 Rear view......................63 Transporting the tumble dryer ................63 Transporting the tumble dryer to its installation site ........63 Installation ......................64 Leveling the tumble dryer................64 Downtime after installation................64 Ventilation .......................
  • Page 5 Contents Programmable functions .................. 79 Programming ....................... 79  Drying levels “Normal” .................. 81  Drying levels “Wrinkle-free”................81  Buzzer volume....................81  Keypad tone ....................81  Code ......................82  Conductivity ....................82  Control field switch-off status ................ 83  Memory......................

  • Page 6: Caring For The Environment

    Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.

  • Page 7: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS  WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:  WARNING This tumble dryer is intended for use in domestic households and similar working and residential environments.
  • Page 8 IMPORTANT SAFETY INSTRUCTIONS  Important information regarding use of fabric softener sheets: We do not recommend use of fabric softener sheets. Use of fabric softener sheets can clog the surfaces of the lint filters, extending the drying time and increasing energy consumption. During subsequent cleaning, the plastic and surfaces of the lint filters can be damaged! The best results are obtained by using liquid fabric softener in the washing machine.
  • Page 9 IMPORTANT SAFETY INSTRUCTIONS  To prevent the risk of fire, the following textiles must not be dried in this dryer: - items which have not been washed. - items, such as work-wear, exposed to grease, oils, or other deposits (such as lotions or cosmetics) in your dryer. If these items have not been thoroughly cleaned there is a danger that they may contribute to a chemical reaction that could cause the laundry to ignite when heated even after being removed from the...
  • Page 10 The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronized with the grid power supply, or these measures must be...
  • Page 11 Miele tumble dryer and the Miele washing machine.  If you order a plinth for this tumble dryer (available from Miele as an optional accessory), make sure it is the correct one. ...
  • Page 12 IMPORTANT SAFETY INSTRUCTIONS  Heat-pump technology and refrigerant: The heat pump in this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temperature level and liquified by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place.
  • Page 13 IMPORTANT SAFETY INSTRUCTIONS Using a fragrance flacon (optional accessory)  Only use genuine Miele original fragrance flacons.  Store the fragrance flacon in its original packaging.  Caution: The fragrance can leak out of the flacon! Make sure that you always keep the flacon, or the lint filter with the flacon inserted in it, in a horizontal position when carrying and do not tip or place it down on any surface.
  • Page 14 IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity  This appliance complies with Part 15 of the FCC regulations. This appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference.

  • Page 15: Operating The Tumble Dryer

    Operating the tumble dryer Control panel             a Control field f Sensor buttons    for the time selection b Sensor buttons for the drying g Start/Add laundry sensor button levels for program start and adding laundry c Indicator lights ...

  • Page 16: How The Program Selector Works

     on when you select a program and switched off by turning the program selector to the  position. MobileStart  You can operate your tumble dryer remotely with the Miele@mobile app.       The , , , and  sensor buttons react to fingertip contact.
  • Page 17 Operating the tumble dryer  Indicator lights  Time display -  The remaining program duration will be displayed in hours and minutes. lights up when the condensed water container needs to be emptied. With most programs, the duration -  displayed may vary or “jump”.

  • Page 18: Energy-Saving Tips

    Energy-saving tips This dryer with heat-pump technology is designed for energy-saving drying cycles. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily. - Make sure your laundry is spun at the maximum spin speed in the washing machine before drying.

  • Page 19: Functioning Of The Heat-Pump Dryer

    Functioning of the heat-pump dryer Two separate circuits ensure that the Refrigerant circuit laundry is dried: The refrigerant circuit regulates the heating and cooling of the drying air Dry air circuit through the heat exchanger. The heat The drying air flows through a heat pump is the central component: This exchanger, the drum, and several is a compressor that is connected to a...

  • Page 20: Initial Set-Up

    - a WiFi network Therefore, the availability of featured functions cannot be guaranteed. - the Miele@mobile app - a Miele user account You can create Miele@home availability a user account via the Miele@mobile The ability to use the Miele app app.

  • Page 21: Downtime After Installation

    Logging in via the Miele@mobile app Removing the protective film The Miele@mobile app can be used to and stickers connect to your network.  Remove: - any protective film from the door...
  • Page 22 Initial set-up Logging in via WPS  Turn the program selector to MobileStart .  Touch the   sensor button until  appears on the time display and a short keypad tone sounds. The timeout then starts to count down from 2 minutes on the time display. ...

  • Page 23: Notes On Correct Laundry Care

    1. Notes on correct laundry care Points to note regarding  Risk of fire due to incorrect use washed laundry and operation. The laundry can burn and destroy - When washing very heavily soiled the dryer and the surroundings. items, ensure that you use sufficient Read and observe “IMPORTANT detergent and select a high SAFETY INSTRUCTIONS”.

  • Page 24: Drying

    1. Notes on correct laundry care Understanding the care label Drying symbols Tip: See the “Program chart”. This describes the programs and gives Drying their maximum load.  Normal/higher temperature - Always observe the maximum  Low temperature* recommended load for each program. This will mean that the energy * Select Gentle consumption for the amount of...

  • Page 25: Loading The Tumble Dryer

    2. Loading the tumble dryer Socket for the fragrance flacon Loading the laundry The “Fragrance flacon” chapter Textiles may be damaged. describes how to use the fragrance Before loading, read “1. Notes on flacon. correct laundry care”. If you are not using a fragrance flacon: Push the tab down completely (see arrow) so that the socket is closed.

  • Page 26: Selecting A Program And Starting It

    Once the program has started, the Switching on the tumble dryer tumble dryer can be operated with the The tumble dryer is switched on when Miele app. you select a program and switched off by turning the program selector to the  position.

  • Page 27: Selecting The Drying Level For Programs With A Selectable Drying Level

    3. Selecting a program and starting it Selecting the drying level for Time-controlled and other programs with a selectable programs drying level Time Dry/DryFresh Normal, Delicates, Bed Linens, Dress You can set the duration in ten-minute Shirts, Denims, Smoothing, Express, increments from  minutes Outdoor to  hours.

  • Page 28: Selecting Gentle

    3. Selecting a program and starting it - This dryer measures residual Selecting Gentle moisture content in the laundry to Delicate fabrics (with the  symbol on ensure perfect drying results. the care label, e.g., acrylic garments) However, if you load the dryer with are dried at a lower temperature and little or dry laundry, it will be dried/ the program duration is longer.

  • Page 29: Removing The Laundry At The End Of The Program

    4. Removing the laundry at the end of the program End of program/Anti-crease Items left in the dryer could be damaged by over-drying when the End of program:  lights up in the dryer is used the next time. time display and the Start/Add laundry Always remove all items from the sensor control goes out.

  • Page 30: Delay Start/Smartstart

     Delay Start/SmartStart Altering Delay Start Selecting Delay Start If you would like to alter the Delay Start You can delay the start of a program function after starting a program, the from  minutes up to  hours. function must be canceled first. However: Delay Start cannot be used ...

  • Page 31: Smartstart

     Delay Start/SmartStart Setting the time period SmartStart If the  SmartGrid programmable The SmartStart function lets you function is activated, the function of define a time period during which your the  sensor button changes. The dryer will start automatically. The start time display no longer shows the takes place via a signal, e.g., from Delay Start period, and instead shows...

  • Page 32: Program Chart

    Program chart All weights marked with * are based on the weight of dry laundry. Normal Full load (17.6 lb/8 kg)* Extra, Normal** Items Single and multi-layered cotton items. For example, T-shirts, underwear, baby clothes, workwear, jackets, covers, aprons, overalls, hand towels, bath towels, bathrobes, and bed linen. - Select Extra for multi-layered and very thick fabrics.
  • Page 33 Small load (6.6 lb/3 kg)* Normal, Hand iron Items All the denim garments, e.g., jackets, jeans, shirts, and skirts. MobileStart  The Miele@mobile app is used to select the programs and operate the appliance. Smoothing Small load (2.2 lb/1 kg)* Normal, Hand iron Items - Cotton and linen fabric.
  • Page 34 Program chart Express Half load (8.8 lb/4 kg)* Extra, Normal, Hand iron, Rotary iron Items Suitable for resistant garments for the Normal program. Note The program duration is shortened. Outdoor Small load (5.5 lb/2.5 kg)* Normal, Hand iron Items Outdoor clothing which is suitable for drying in a tumble dryer. Proofing Small load (5.5 lb/2.5 kg)* Items...
  • Page 35 Program chart Time Dry/DryFresh Full load (17.6 lb/8 kg)* Note - For airing or drying textiles (Time Dry) - For freshening up textiles (DryFresh) - Do not select the longest drying time to start with. Check the items as you are drying them to find the optimum time. Items - Airing: multi-layered textiles whose layers have different drying characteristics, e.g., jackets, pillows, sleeping bags, and other...

  • Page 36: Changing The Program Sequence

    Changing the program sequence Changing a program once it Adding or removing laundry has started You have forgotten an item of laundry, but the program has already started. It is no longer possible to change the selected program. This prevents the ...

  • Page 37: Condensed Water Container

    Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying program. The  indicator light will light up if the maximum level of the condensed water container is reached.

  • Page 38: Fragrance Flacon

    Fragrance flacon Removing the protective seal from FragranceDos the fragrance flacon Fragrance flacons (optional Only hold the fragrance flacon as accessories) can be used to give your illustrated. Do not hold it at an angle laundry a pleasant scent. or tip it as the fragrance will leak out Tip: You can simply close the fragrance of the flacon.

  • Page 39: Inserting The Fragrance Flacon

    Fragrance flacon Inserting the fragrance flacon  Open the door of the tumble dryer. The fragrance flacon is inserted in the upper lint filter next to the recessed grip. Markers  and  must line up with one another.  Open the cover using the tab until the tab is right at the top as shown.

  • Page 40: Opening The Fragrance Flacon

    Fragrance flacon Damp laundry and longer drying Opening the fragrance flacon durations with sufficient heat transfer Before drying, you can select the are needed for the fragrance to be intensity of the fragrance. released into the laundry effectively. The fragrance will also be noticeable in the room air during the process.

  • Page 41: Removing/Replacing The Fragrance Flacon

    - Always store in a cool, dry place Fragrance flacons are available to away from direct sunlight. order from Miele retailers or online. - When purchasing new fragrance flacons, only remove the protective seal just before use.

  • Page 42: Cleaning And Care

    Cleaning and care Lint filters This tumble dryer has 2 lint filters in the door opening: The upper and lower lint filters trap lint produced during the drying process. Clean the lint filters after each drying program. This prevents an extension of the program duration.

  • Page 43: Cleaning The Lint Filters And Air Flow Openings Thoroughly

    Cleaning and care  Remove the lint (see arrows) from the  Turn the yellow dial on the lower lint filter surface of all the lint filters and filter in the direction of the arrow (until the perforated laundry deflector. you hear it click).

  • Page 44: Cleaning The Lint Filters With Water

    Cleaning and care Ensure the filters are dry before replacing them. Wet filters could cause operational faults.  Push the lower lint filter in completely and lock it with the yellow dial.  Push the upper lint filter in completely. ...

  • Page 45: Cleaning Instructions When Using Fabric Softener Sheets

    Cleaning instructions when using Option 3 fabric softener sheets  Wet the surfaces of the lint filters with a liquid color detergent (e.g., Miele If you are using fabric softener sheets, Ultra Color Liquid Laundry Detergent). please follow these warnings and instructions.

  • Page 46: Cleaning The Plinth Filter

    Cleaning and care Cleaning the plinth filter Clean the plinth filter whenever the  indicator light comes on or when the program duration is longer than usual. To turn the  indicator light off:  Open and close the door while the dryer is switched on.

  • Page 47: Cleaning The Plinth Filter

    Cleaning and care Cleaning the plinth filter  Install the plinth filter back on the handle. Make sure it is the correct  Pull the handle out of the plinth filter. way round.  Clean the plinth filter thoroughly under running water. ...

  • Page 48: Cleaning The Plinth-Filter Access Panel

    Cleaning and care Cleaning the plinth-filter access Cleaning the dryer panel Disconnect the tumble dryer from the electrical supply.  Damage due to the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all- purpose cleaners.

  • Page 49: Frequently Asked Questions

    Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Indicator lights or information on the time display Problem Possible cause and solution...
  • Page 50 Frequently Asked Questions Problem Possible cause and solution   and  continue to The plinth filter looks clean after thorough cleaning. However, the program terminates and the fault flash after a program has been canceled, de- message appears again. It is likely that there is still spite thorough cleaning.
  • Page 51  Start a program. a program has If the program is interrupted again and an error been cancelled, a message appears, there is a fault. Contact Miele signal sounds. Service. : lights up and the The laundry is unevenly distributed or has rolled up.

  • Page 52: Unsatisfactory Drying Results

    Frequently Asked Questions Unsatisfactory drying results Problem Possible cause and solution The laundry is not suffi- The load consisted of different types of fabric. ciently dry.  Finish drying using the Time Dry/DryFresh program.  Select a more suitable program next time. Useful tip: you can alter the drying levels for some programs.

  • Page 53: The Drying Cycle Duration Is Very Long

    Frequently Asked Questions The drying cycle duration is very long Problem Possible cause and solution The drying process The room where the tumble dryer is located is too goes on too long or warm. even switches off.*  Ventilate the room thoroughly. Detergent residues, hair, and fine lint can clog the filters.

  • Page 54: Other Problems

    Frequently Asked Questions Other problems Problem Possible cause and solution You can hear operating This is not a fault. The compressor is operating. noises (buzzing/hum- These noises are quite normal and can be heard ming). when the compressor is operating. A program does not There is no obvious cause.

  • Page 55: Replacing The Plinth Filter

    Frequently Asked Questions Deformation Replacing the plinth filter The heat exchanger can clog up. Replace the plinth filter immediately if you see the following signs of wear before or after cleaning (optional accessory). Poor fit Deformations indicate that the plinth filter has become worn.
  • Page 56 Frequently Asked Questions Cracks, tears, indentations White residues or residues of other colors Residues arise from laundry fibers and traces of detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crust. Residues are a sign that the plinth filter no is longer a snug fit at the sides, even if it appears to be perfect:...

  • Page 57: Reactivating The Plinth Filter

    Frequently Asked Questions Reactivating the plinth filter Checking the heat exchanger unit You can reactivate one or more dirty plinth filters in the washing machine.  Risk of injury from sharp cooling You will then be able to use the plinth fins.

  • Page 58: Bottom Right Grille

    Frequently Asked Questions Bottom right grille  Danger of injury! Do not touch the cooling fins with your hands. You  In general, the cooling fins could cut yourself. behind the grille on the bottom right do not need cleaning. They should ...

  • Page 59: Customer Service

    You can register your product and/or Miele dealer or Miele Customer Service. view the manufacturer´s warranty terms and conditions for Miele appliances and You can book a Miele Service Call vacuum cleaners at online at www.miele.com/service. www.mieleusa.com. Contact information for Miele...
  • Page 60  Install the clothes dryer according to the manufacturer's instructions and local codes.  Repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty. ...
  • Page 61 Do not install the machine in rooms where temperatures below freezing may occur.  This dryer is not intended for wall-insert.  If there is any doubt concerning installation, contact Miele’s Service Department. 888-99-MIELE(64353) service@mieleusa.com 1-800-565-6435 service@miele.ca SAVE THESE INSTRUCTIONS...
  • Page 62 *INSTALLATION* Installation Front view a Drain hose for condensed water e Door – do not open during drying b Power cord f Access panel to the heat exchanger –  Observe the section entitled and plinth filter “Electrical connection”. – do not open during drying c Control panel g Cool air intake grille d Condensed water container...
  • Page 63 *INSTALLATION* Installation Rear view  If the tumble dryer is being transported on its side, it must be tipped onto its left or right side. a Protruding lid for holding when  If the tumble dryer is being moving the tumble dryer (see transported upright and you are using arrows) a hand truck, you must transport it...
  • Page 64 *INSTALLATION* Installation Downtime after installation Installation  Damage caused by switching the Leveling the tumble dryer appliance on too soon.  Ensure that no closeable door, This can damage the heat pump. sliding door, or an oppositely hinged After setting up the tumble dryer, door is installed that would hinder wait for at least one hour before the door of the dryer being opened in...
  • Page 65 *INSTALLATION* Installation Before moving the tumble dryer Installing the dryer in a closet again Minimum installation distance A small quantity of condensed water  that remains in the area around the You must insert sufficiently large pump after the drying process can run ventilation openings into the closet out if the dryer is tilted.
  • Page 66 *INSTALLATION* Installation Installing the dryer in a floor-to-ceiling closet You can also insert a ventilation opening at the top of the closet. In addition, you must also provide an opening on the bottom side of the closet door. Direct ventilation is also possible via an air conditioning outlet in the closet.
  • Page 67 *INSTALLATION* Installation Washer-dryer stack Product dimensions - WTV502 or WTV512 Dimensions  5.2 ft (1.6 m) drain hose, detachable, top right on the rear  6.5 ft (2 m) power cord, bottom right on the rear Installation on a plinth - WTS 510...
  • Page 68 Miele (USA or inspected by a qualified electrician. CDN). Miele cannot be held liable for the consequences of an inadequate grounding system. The electrical socket must be easily accessible so that the dryer can be disconnected from the electricity supply.
  • Page 69 *INSTALLATION* Installation External draining of condensed water Note When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be externally drained away via the drain hose on the back of the dryer.
  • Page 70 *INSTALLATION* Installation Removing the door Changing the door hinging You will need a Torx T30 screwdriver. Preparation  Open the door of the tumble dryer This tumble dryer is delivered with the fully. door hinging installed on the right- hand side. You can change the door hinging over to the left-hand side.
  • Page 71 *INSTALLATION* Installation Changing over the door lock  Insert the door lock into the opening on the opposite side .  Use the Torx screwdriver to unscrew the two screws  on the door lock.  Adjust the position of the door lock so that the two screw holes line up with the two holes in the front panel of the dryer (arrows).
  • Page 72 *INSTALLATION* Installation Removing the door seal and the Removing the outer plate from the screws door  Holding the door firmly in one hand, Removing the door seal stand it upright on the blanket.  Starting from one side and working all ...
  • Page 73 *INSTALLATION* Installation Changing over the door hinge and Removing the door hinge the caps Start by removing the door hinge . Next, swap the caps for the door latches marked R and L. The tumble dryer is delivered with the cap marked R at the top. ...
  • Page 74 *INSTALLATION* Installation Removing the caps Converting the lock catch  Remove the screw from the cap  Push the lock catch all the way up marked R and take off the cap. from the back of the tumble dryer.  Set aside the screw you have ...
  • Page 75 *INSTALLATION* Installation Installing the caps and the hinge Installing the outer plate on the door  Place the outer plate on the blanket outer side down. The yellow marker should be on the top left.  Screw the cap marked L tight with one screw.
  • Page 76 *INSTALLATION* Installation  Lower the door carefully without Inserting the screws and installing twisting it. The door and the outer the door seal plate must fit together like a pot with its lid.  Place one hand flat underneath the outer plate of the door.
  • Page 77 *INSTALLATION* Installation Installing the door  Position the door in front of the dryer.  Install the base of the door hinge with its two pins in the openings on the tumble dryer. Tip: The base of the door hinge must be flush with the front panel of the dryer.
  • Page 78 Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 3/4" (655 mm) Depth with door open 42 3/8" (1077 mm) Slot-in Stackable Weight Approx. 137 lbs (62 kg) Drum volume 31.7 gal (120 l) Load quantity 17.6 lb (8 kg) dry laundry Capacity of condensed water container 1.27 gal (4.8 l) Hose length 63"...
  • Page 79 Programmable functions Choosing and selecting Programming programmable functions You can use the programmable The number of the programmable functions to alter the dryer's function will appear on the display electronics to suit your requirements. as  and a number: Programming is carried out in these e.g., .
  • Page 80 Programmable functions  Confirm the chosen selection with Editing and saving the programmable function the Start/Add laundry sensor button. You can either switch a programmable The number of the programmable function on/off or select different function (e.g.,  ) will then light up options.
  • Page 81 Programmable functions  Drying levels “Normal”  Buzzer volume You can adjust the drying levels for the The buzzer volume can be changed. Normal program to one of seven  = Quieter different levels.  = Factory default Options  = Even damper  Keypad tone ...
  • Page 82 Programmable functions  Code  Conductivity The code prevents your dryer being This programmable function should used without your knowledge. only be altered if the water is so soft that it is likely to cause the electronics When the code has been activated, you which sense residual moisture in the have to enter the code after switching laundry to give false readings.
  • Page 83 Programmable functions  Control field switch-off  Memory status You can set the following: the electronic will save the drying level To save energy, the time display and and any options selected for the sensor buttons will go out once the current drying program. It will also program has been running for save the duration of the Time Dry/ 10 minutes.
  • Page 84 Programmable functions  Buzzer on  = Off The  indicator light does not The buzzer sounds to let you know the come on. However, if there is a program has finished. It can be very severe blockage in the switched on or off.
  • Page 85 Programmable functions  Display brightness dimmed The brightness of the dimmed sensor buttons in the control field can be set to one of 7 different levels. The brightness will change as soon as a different setting is chosen. Options  = Darkest level ...
  • Page 86 If an update is available for your requirements for using Miele@home tumble dryer, it will automatically have been met (see “Miele@home” download it. Updates will not be and “Initial set-up”). installed automatically. They must be initiated manually.
  • Page 87 Programmable functions - Some software updates can only be Postponing the update carried out by Miele Customer After the tumble dryer is switched on, Service.  appears on the time display. Activating/deactivating  Touch the  sensor button. The RemoteUpdate function is The next time you switch on the activated by default.
  • Page 88 Programmable functions  Remote control  SmartGrid You can use the Miele@mobile app to You can set your tumble dryer to start check the status of your tumble dryer automatically based on an external from anywhere and start it remotely. signal within a certain time period.
  • Page 89 This software/ these software components are protected by copyright. The copyrights held by Miele and third parties must be respected. This communication module contains software components which are distributed under open source license conditions.
  • Page 91 Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive www.mieleusa.com Vaughan, ON L4K 4V8 www.miele.ca Customer Support Phone: 888-99-MIELE (64353) Customer Care Centre info@mieleusa.com...
  • Page 92 TXD 160 WP en-US M.-Nr. 12 303 020 / 00...

Table of Contents