Philips TAB7908 User Manual page 17

Table of Contents

Advertisement

Auto volume (
AUVOL
Combine Auto volume with Night mode.
OFF:
Do not use "
ON: Responds in real time to
different sources and types of
content to maintain consistent
loudness.
NIGHT: Maintain even loudness
for all sources and types of
content, and enhanced vocal and
dialogue to make it easier to hear
in a quite listing environment.
DTS Virtual:X (
DT VRT X
DTS Virtual:X allows you to enjoy multi-
dimensional sound regardless of room
size, layout, or speaker configuration.
DTS Virtual:X technology features
DTS's proprietary virtual height and
virtual surround processing to deliver
an immersive sound experience from
any type of input source (stereo to 5.1.2
channel) and speaker configuration.
ON:
This mode uses DTS Virtual:X
with virtual height and virtual
surround processing to realize a
three-dimensional sound field when
the height speakers are not used.
OFF:
Do not use "DTS Virtual:X" .
» Only available if DTS content is
detected.
AV SYNC (
AV XXX
Set the Audio Delay.
Video image processing, sometimes
longer than the time required to process
the audio signal. This is called "delayed."
Audio Delay feature is designed to
remedy this delay.
AV 00. AV 10 ... AV200
» By default, the audio delay is set
to 00.
)
Auto volume
)
)
Center (
Adjust the center channel volume.
" .
» By default, the center channel
Display off (
The display to be turned off after idling
(no user action) for 3 seconds, and shall
be remembered and recalled at the next
power up.
» By default, the display is set to ON.
Auto Standby (
The soundbar automatically turns to
Standby mode after about 15 minutes
if the TV or the external soundbar is
disconnected (or USB, BT function bit
playback pause), or switched off.
» By default, Auto-Standby is set
DIM (
Set display brightness.
» By default, the dimmer is set to
Audio reset (
Restore the default sound effect
Item
EQ
Master Volume
Subwoofer Volume
)
CTR XX
CTR-5 ... CTR+5
volume is set to 0.
)
DI P
OFF: Display off after idling (no
user action) for 3 seconds.
ON: Display won't turn off.
)
APD
ON: Auto-Standby ON.
OFF: Auto-Standby OFF.
to ON.
)
DI
XX
HIGH, MID, LOW
MID.
)
AUR T
Default settings
Movie
10
0
EN
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

7000 seriesTab7908/10

Table of Contents