Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZGO65414
Summary of Contents for Zanussi ZGO65414
- Page 1 User manual ZGO65414...
-
Page 2: Table Of Contents
• Cleaning and user maintenance shall not be made by children without supervision. General Safety • The appliance and its accessible parts become hot during use. Do not touch the heating elements. • Do not operate the appliance by means of an external timer or separate remote-control system. www.zanussi.com... -
Page 3: Safety Instructions
• Make sure not to cause damage to the mains • The bottom of the appliance can get hot. We plug (if applicable) or to the mains cable. recommend to install a non-combustile sepa- Contact the Service or an electrician to change a damaged mains cable. www.zanussi.com... - Page 4 There is a risk of over- or as a storage surface. heating and rupture of the glass plate (if ap- • If the surface of the appliance is cracked, plicable). disconnect immediately the appliance from www.zanussi.com...
-
Page 5: Product Description
Symbol Description mum gas supply no gas supply / off posi- tion minimum gas supply Daily use Warning! Be very careful when you use Warning! Refer to the Safety chapters. open fire in kitchen environment. Ignition of the burner www.zanussi.com... -
Page 6: Helpful Hints And Tips
• If possible, always put the lids on the pans. • When the liquid starts to boil, turn down the Rear Semi-rap- 120 - 240 mm flame to barely simmer the liquid. Use cookware with diameters applicable to the Auxiliary 80 - 180 mm size of burners. www.zanussi.com... -
Page 7: Care And Cleaning
• The pan supports are not dishwasher proof. – Stop the appliance and let it cool They must be washed by hand. down before you clean: limescale rings, water rings, fat stains, shiny metallic dis- www.zanussi.com... -
Page 8: Troubleshooting
5 seconds. The gas ring burns unevenly • Burner crown is blocked with • Make sure that the injector is food residues not blocked and the burner crown is clear of food particles. www.zanussi.com... -
Page 9: Installation
G 1/2". Screw the Choose fixed connections or use a flexible pipe parts without force, adjust the connection in the in stainless steel in compliance with the regula- necessary direction and tighten everything. tion in force. If you use flexible metallic pipes, www.zanussi.com... - Page 10 • If you change from natural gas G25.1 (2HS) correct. Use a soapy solution, not a flame! 25 mbar to liquid gas, fully tighten the by- pass screw in. Injectors replacement 1. Remove the pan supports. www.zanussi.com...
- Page 11 90 °C. The blue neu- to remove and let an easy access in case a tral cable must be connected to the terminal technical assistance intervention is necessary. block label with "N". The brown (or black) www.zanussi.com...
-
Page 12: Technical Information
Electric supply: 230 V ~ 50 Hz Gas connection: R 1/2 " Category: II2HS3B/P Gas supply: G20 (2H) 25 mbar Appliance class: By-pass diameters Burner Ø By-pass in 1/100 Burner Ø By-pass in 1/100 Semi-rapid Rapid Auxiliary Gas burners www.zanussi.com... -
Page 13: Environment Concerns
>PE<,>PS<, etc. Discard the packaging mate- otherwise be caused by inappropriate waste rials as household waste at the waste disposal handling of this product. For more detailed facilities in your municipality. www.zanussi.com... - Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...