Brother DCP-1612W Quick Setup Manual

DCP‑1612W
Quick Setup Guide
Version 0
CAN-ENG
Unpack the machine and check the components
Watch our FAQ Videos for help
with setting up your Brother
machine:
solutions.brother.com/videos.
1
Remove the packing materials and install the toner cartridge
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
Back
4
Change your language (if needed)
1.
Press Menu, and then press ▲ or ▼ to choose 1.General Setup.
2.
Press OK.
3.
Press ▲ or ▼ to choose 0.Local Language, and then press OK.
4.
Press ▲ or ▼ to select your language, and then press OK.
5.
Press Stop/Exit.
5
Connect the machine to your computer/mobile device
• Windows PC with a CD-ROM drive, go to step
®
• Windows PC without a CD-ROM drive, go to step
®
• Macintosh, go to step 5B
• Mobile device users with a WPS/AOSS™-supported access point/router, go to step
Starter Toner Cartridge
CD‑ROM
To use A5 Long Edge paper.
Front
5A
5B
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
NOTE:
• The components included in the box and the AC power plug may differ
depending on your country.
• You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet
(2 meters) long.
A5 Long Edge Paper Input
Support
Adjust the paper guides to fit
the paper being used.
5C