Operating The Appliance; Filling/Refi Lling With Water - Silvercrest 103808 Operating Instructions Manual

Operating the appliance

GB
MT
Filling/refi lling with water
56
WARNING! RISK OF INJURY!
To ensure fault-free operation and a long service life for the
appliance, pay heed to the following instructions:
► Do not press the steam lever
If you press too early, it may cause an accumulation of hot water in the
steam nozzle which will drip or spray from the nozzle. There is a risk
6
of scalding.
► Before switching off , allow all of the steam to escape from the appliance.
Press the steam lever
nozzle .
6
► If the appliance is to be used in continuous operation, the "Child safety
lock" button with the symbol
2
RISK OF ELECTRIC SHOCK
► Always disconnect the plug from the mains power socket before you add
water to the water tank
Open the safety valve
CAUTION – PROPERTY DAMAGE!
► Do not put any additives or cleaning agents in the water tank
NOTE
► Ensure that you fi ll the appliance's water tank
Fill the water tank
3
To do this, use the supplied measuring cup
(see fi gure). Fill the measuring cup
(approx. 250 ml).
Reclose the safety valve
until the green control lamp
until no more steam comes out of the steam
must be pressed before switching off .
!
3
.
8
3
with water through the fi ller opening
16
with water up to the marking line
16
.
8
lights up.
5
!
3
with around 250 ml of water.
.
7
and the funnel for assistance
17
SDR 900 A1