Dismantling The Cutting Unit - Husqvarna Rider 13C Workshop Manual

Dismantling the cutting unit

Rear ejectors
1
• Place the machine on a level surface.
• Apply the brakes by pressing down the pedal
and lock using the pushbutton.
WARNING!
Wear eye protection and work
gloves when working on the
mowing deck.
2
Remove the front cover. Remove the right and left
folding cover.
3
Raise the mowing deck to the transport position
with lifting lever.
Work off the belt from the mowing deck's rear
pulley.
52
– English
4
Lower the mowing deck to the mowing position
with the lifting lever. Set the lowest mowing height
with the mowing height lever.
5
Remove the hairpin spring holding the lifting chain
in the mowing deck.
WARNING!
The mowing deck will drop to
the ground when the lock pins
are removed. Risk for pinch
6
Remove the lock pins (safety pins) on both sides
of the back of the mowing deck.
Fit the mowing deck in the reserve order.
Reparation instructions