Sharp AQUOS 4T-80CJ1U Operation Manual page 68

>> Using LINK Operation
<<
Link Operation Menu (Continue)
Show Start Menu
You can call up a setup menu from the connected LINK-
compatible equipment.
NOTE
Depending on the status of the equipment (recording or in
standby mode, etc), the setup menu will not be displayed.
ENG 6-4
Change Audio Output Device
You can select to listen to the TV sound only from the LINK-
compatible audio system.
Audio Return Channel: The sound from the TV speaker is
muted and only the sound from the LINK-compatible audio
system is audible.
• You can use VOL+/- and MUTE.
Built-in Speaker: The sound is output from the TV speaker.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy chain, you
can specify which device to control here.
Press / to select the desired device from a list of
connected HDMI devices, and then press ENTER.
HDMI CEC LINK
You can also display the HDMI CEC LINK screen from the
Link Operation Menu.