Electrolux QuickSource EYB00416SS Installation And User Manual page 13

Step Action
10 Attach the pressure safety valve.
If you install the solo configuration:
– Attach the pressure safety valve (C) to the the plastic t-pipe (18)
NOTICE! Mind the orientation (see image 11).
If you install the combi configuration:
– Attach the pressure safety valve (C) to the the plastic t-pipe (18)
NOTICE! Mind the orientation (see image 11).
– Mount the bracket (36) with the four screws (35) to kitchen cabinet
wall (see image 16).
– Attach the mixing valve (D) to the bracket (36) with the tie wrap
(33) according to the instructions supplied with the pressure safety
valve (see image 17).
– Connect the pressure safety valve (C) to the mixing valve (D) using
a water hose (see image 18).
Connect the boiler.
11
If you install the solo configuration:
– Connect the cold water inlet of the boiler (1) to the cold water
outlet of the pressure safety valve (20) (see image 19). NOTICE!
The cold water inlet of the boiler (1) bears a blue label.
If you install the combi configuration:
– Connect the cold water inlet of the boiler (1) to the cold water
outlet of the mixing valve (29) (see image 20). NOTICE! The cold
water inlet of the boiler (1) bears a blue label.
12 Connect the boiling water.
NOTICE! Always use the provided seal when connecting the tap hose.
If you install the solo configuration:
– Connect the boiling water outlet of the boiler (2) to the boiling
water inlet of the tap (11) (see image 21). NOTICE! The boiling
water outlet of the boiler (2) bears a red label. The boiling water
inlet of the tap (11) bears a red label.
If you install the combi configuration:
– Connect the boiling water outlet of the boiler (2) to one end of the
extension hose (34). Connect the other end of the extension hose
(34) to the boiling water inlet of the mixing valve (24 or 25) (see
image 22). NOTICE! The boiling water outlet of the boiler (2) bears
a red label. The boiling water inlet of the mixing valve (24 or 25) is
indicated with "H".
– Connect the boiling water inlet of the tap (11) to the boiling water
outlet of the mixing valve (24 or 25) (see image 23). NOTICE! The
boiling water inlet of the tap (11) bears a red label. The boiling
water outlet of the mixing valve (25 or 26) is indicated with "H".
ENGLISH 11