Advertisement
Assemble and Install the Mounting Kit
5
By hand, bend the right and left anti-tip tabs on the
base assembly upward to a 90°angle.
7
Remove all contents from inside microwave, including
glass tray and plastic guide. Lay microwave on pad or
blanket, and carefully flip the unit upside down.
9
Insert latch in front of each base support.
11
After plugging power cord back in,
back into cabinet cutout. Be sure base supports fit
securely into rear slots.
13
Reattach exterior trim kit frame.
6
8
10
12
s
lide microwave
BSH Home Appliances Corporation
5551 McFadden Ave., Huntington Beach, CA 92649
58300000134755 ABZ EN A - 9000390620
October 2008
Install base assembly. With drill or Phillips screwdriver,
insert two ½" screws (circled below) into existing holes
for proper alignment. Insert four remaining ½" screws.
Using pliers, remove plastic feet from bottom of
microwave.
With a T20 torx screwdriver, secure base supports to
microwave using 4 self-tapping bolts. Insert bolts into
existing holes in bottom of microwave.
Insert Phillips-head #8-18 screw into front of each base
support (screws will thread into 90° anti-tip tabs).
For further assistance, please contact our technical
assistance team at 1-800-444-9091.
Visit QuickFinder at http://portal.mch.bshg.com/portal
Advertisement
