Stable Running - Panasonic MIR-H163 Series Operating Instructions Manual

STABLE RUNNING

Table 4 shows the basic procedure for setting the chamber temperature. Perform key operations in the
sequence indicated in the table. The example in the table is based on the assumption that the desired
o
temperature is 37 C and the operation status is a continuous running.
The initial setting, which are set at factory,
Note:
are that the delay timer is OFF, the chamber
o
temperature is 0
the timer mode is the normal mode.
Table 4: Basic operation sequence (Example: Chamber temperature; 37
Description of operation
1 Press the power key.
2 Press the delay timer key.
Press the delay timer key
3
to reset the delay time.
4 Press the delay timer key
5 Press the call key.
Set the temp. to 37.0
6 with the digit shift key
and the numeric value shift key.
9 Press the run/stop key.
C, the running time is ever ON,
Key operated
37
Indication after operation
The current chamber temperature is displayed.
POWER
The current delay time is displayed.
DELAY
Reset the delay time.
DELAY
The current chamber temperature is displayed.
DELAY
The left digit of the temperature indicator flashes.
CALL
RUN
The setting mode is completed and the unit runs.
STOP
16
o
C
Time
o
C, Continuous running)