Figure 7. Remove the solid-state drive copper foil
Go to
https://support.lenovo.com/partslookup
replacement parts:
Solid-state drive
Solid-state drive thermal pad
Solid-state drive copper foil
Remove the speakers
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 26
Step 1.
Disconnect the battery pack cable and speaker cable from the system board. Then, remove six
screws and remove the speakers.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
30
Lenovo ThinkBook Plus Gen 4 Hardware Maintenance Manual
to look up the Lenovo part numbers of the following