Maintenance; Insert Divar 5000 In Rack; Replace Internal Battery; Install Hdd - Bosch DIVAR hybrid 3000 Installation Manual

Network/hybrid recorder
Table of Contents

Advertisement

24
en | Maintenance
6

Maintenance

6.1

Insert DIVAR 5000 in rack

1.
2.
3.
4.
5.
Notice!
When installing the assembly into the rack, do not restrict air flow around the vents located
on the side panels or exceed the recommended operating temperature.
6.2

Replace internal battery

Warning!
Lithium battery:
Batteries that have been inserted wrongly can cause an explosion. Always replace empty
!
batteries with batteries of the same type or a similar type recommended by the manufacturer.
Handle used batteries carefully. Do not damage the battery in any way. A damaged battery
may release hazardous materials into the environment.
Dispose of empty batteries according to the manufacturer's instructions, or local directives.
Replace internal battery
This product uses a 3.0 V Lithium CR2032 battery as the backup power supply for internal
system status (e.g. real time clock). Under normal circumstances this battery will last a
minimum of 5 years. Low battery power may mean that system time must be reset at each
power up. A log message appears when the battery needs replacing (only replace when
required).
Contact Bosch for replace instructions.
6.3

Install HDD

See separate Quick Install Guide.
Refer to the Appendix for recommended HDD types.
6.4

Install DVD

See separate Quick Install Guide.
Refer to the Appendix for recommended DVD types.
2020-05 | V4.0 | AM18-Q0712
Remove the four cross head screws (two on each side) located near the front panel on
the right and left side of the unit.
Secure the supplied brackets to each side using the same four cross head screws (two on
each side) that were just removed.
To install several units directly on top of each other, remove the rubber feet from under
the unit by prying them loose with a small screwdriver.
Install the unit into the rack using the hardware supplied with the rack and following the
rack manufacturer's instructions.
Support the back of the unit and secure the connection cables to the rack to relieve
excessive weight to the back of the unit.
Installation manual
DIVAR 2000 | DIVAR 3000 | DIVAR 5000
Bosch Security Systems B.V.

Advertisement

Table of Contents
loading

Table of Contents