Table of Contents
Advertisement
If You cannot Connect to the Base Station
z
Tip
When the connection is established from the computer to the base station, the
computer is registered under the name that you set in (4) of the procedure above
in the [Registered monitors] list of the [Register Other Monitors] screen.
If the name of the registered computer does not appear, select [Refresh] to update
the display.
If an error message appears when you click [Connect], perform the following
procedure at the base station to confirm the connection settings. Also confirm
that the base station is set to accept registration.
1
Click [Settings] at the right bottom of the window.
The [Settings] screen appears.
Note
If the [Settings] button does not appear, enlarge the window until it does
appear.
Settings
Step 5 Registering Your Computer with the Base Station
Pre-release version
15
Advertisement
Table of Contents
