Cleaning And Care - Silvercrest 93480 Operating Instructions Manual

__GRA93480_B4.book Seite 10 Montag, 9. September 2013 9:12 21

7. Cleaning and care

DANGER! Risk of electric shock!
Pull the power unit out of the wall socket before you clean the device.
WARNING! Risk of injury!
Always switch off the device before cleaning it.
WARNING! Risk of material damage!
• The blades|2 of the shaving head|9 may only be cleaned with medical al-
cohol. Do not use any water or other liquids. Oil the blades as described in
the following chapter.
• Do not use any astringent or abrasive cleaning agents.
NOTE: clean and oil the device after every use.
• Remove the comb attachment|1. Rinse the comb attachment with water and
let it dry before reattaching it to the device.
• Wipe down the housing of the device with a damp cloth.
Cleaning and oiling the shaving head
1. Figure D: remove the shaving head |9 from the device by pressing it with
the thumb towards the rear.
2. Remove the hair remnants from the shaving head by using the cleaning
brush included in the delivery.
3. Clean the blades|2 of the shaving head|9 with medical alcohol (not sup-
plied). Do not use any water or other liquids. Let the shaving head dry.
4. Apply a few drops of the supplied oil to the blades|2 of the shaving
head|9 and spread it out evenly. Using a soft cloth, wipe off the surplus oil,
if necessary. Only use acid-free oil, such as e.g. sewing machine oil.
5. Figure E: guide the lug of the shaving head|9 under the edge of the hous-
ing and press the shaving head downwards onto the blades until it is heard
to lock in place.
10 GB