Table of Contents
Advertisement
2. Using the numeric keys, enter all the digits of the
call forward off sequence.
You can change a single digit by scrolling the cursor
left [] and right []. For special characters (eg. , =
pause, * or # etc), use the [] and [] keys.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Email Reporting
In addition to Back to Base monitoring you can also
configure your alarm system to send selected reports to an
email address of your choice. To activate email reporting,
simply enter the email address in MENU 5-5-8 and then
select the required report types in MENU 5-5-9.
The Site Name in MENU 7-7-7 is used in the email subject
line when email reporting. You should also program this
name to make it easier to identify email sent by your alarm
system.
To cancel email reporting simply remove the email address
by going to MENU 5-5-8 and then pressing the [OFF] key
followed by the [OK] key.
Currently email reporting functionality is only
i
available for panels located in Australia.
Note
Comms > MyAlarm >
Email Address
This menu allows the master user to program an email
address that the system will send email reports to. A
maximum of 80 characters can be used to program the
email address.
1. Enter your Master PIN + [MENU].
2. Enter [5] + [5] + [8] + [OK].
The keypad will display the current email address.
Email Address
_
Press
3. Use the numeric, [0] to [9], [] and [] keys to enter
or change the email address as required.
At any time you can use the [] and [] keys to scroll
through the complete list of available characters.
To clear all characters from the cursor position to the
right, press the [OFF] key.
4. When the email address is complete, press [OK] to
save and exit, or press [MENU] to exit without saving.
To stop email reporting simply remove the email
address or disable all of the email options in MENU 5-5-
9.
Bosch Security Systems 3/23 BLCC610U
MENU 5-5-8
OK to SAVE
When entering an email address the @ symbol is
i
represented on the keypad display as
Note
To enter this character press the 1 key repeatedly until
the symbol appears in the display.
Comms > MyAlarm >
Email Options
This menu allows the master user to select which event
types will be reported using the email reporting function.
By default the first 4 options are set to report via email.
Follow the procedure below to configure the required
options.
Option
Description
1
Open Close Reports
2
Zones Reports
3
System Reports
4
Access Reports
5
Reserved
6
Reserved
7
Reserved
8
Reserved
Table 7: Email Options
1. Enter your Master PIN + [MENU].
2. Enter [5] + [5] + [9] + [OK].
The keypad will display the list of current options.
Options with a preceeding tick mark are selected.
Open Close
Zones
System
Press
3. Use the [] and [] keys to highlight the feature that
you want to program, then use the [ON] and [OFF]
keys to turn on and off the features as required.
4. When all email options are programmed, press [OK]
to save and exit, or press [MENU] to exit without
saving.
Solution 6000
User Guide
MENU 5-5-9
Default
Send Reports
Send Reports
Send Reports
Send Reports
OK ON OFF MENU
.
33
Advertisement
Table of Contents
