DIR-615 Wireless N300 Router
User Manual
Creating Dynamic IPv6 or Static IPv6 WAN Connection
On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection Type drop-down list and specify the needed values.
Figure 61. The page for creating a new Static IPv6 connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 71 of 184
Configuring via Web-based Interface
Description