Step 3: Connecting Your Tv Set - Sony SAT-W60 Installation Manual

01USBook.BOOK Page 11 Wednesday, July 5, 2000 12:24 PM

Step 3: Connecting Your TV Set

Digital Satellite Receiver/Recorder
1c
1b
If your TV has A/V input jacks
1a
Connect the VIDEO OUT jacks on your Digital Satellite Receiver/Recorder to the
A/V input jacks on your TV using the supplied A/V cable. (Be sure to match the
colors on the jacks with the colored plugs on the A/V cable.) If your TV has only one
audio input, connect it to the L(MONO) jack on the receiver/recorder.
1b
If your TV has an S-Video input
Use an S-Video cable instead of the yellow video connection. S-Video cable is
supplied.
If your TV does not have A/V jacks
Connect the VHF/UHF OUT jack to the VHF/UHF input jack on your TV using
1c
coaxial cable. Set the CH3/CH4 switch to the channel that does not carry off-air
broadcasts in your area.
Note
With this connection, your input source
is channel 3 or channel 4 depending on
how you set the CH3/CH4 switch on the
receiver/recorder.
Connecting Your Receiver/Recorder
1a
TV
VHF / UHF
IN
VIDEO 1 VIDEO 2
S VIDEO
VIDEO
L
(MONO)
AUDIO
R
11