Cup Heater; Activating And Deactivating The Cup Heater; Basic Settings; Changing The Basic Set- Tings - Bosch VeroCafe TIE20 Series Information For Use

ATTENTION!
Risk of damage to the grinder. The
grinder may be damaged if the grind-
ing level is not set properly.
▶
Only set the grinding level when
the grinder is running.
▶ Select the grinding level using the
rotary selector step by step.
Grinding level Setting
Fine grinding
level for lightly
roasted beans
Coarse grind-
ing level for
dark-roasted
beans
The grinding level setting only
takes effect after the second cup.
Tip: If the coffee is only dispensed
drop by drop, set a coarser grinding
level.
If the coffee is too thin with too little
crema, set a finer grinding level.
9 Cup heater
You can use the cup heater to pre-
heat your cups.
1
Depending on the appliance specifications
Turn rotary se-
lector anticlock-
wise.
Turn rotary se-
lector clockwise.
1
9.1 Activating and deactivat-
ing the cup heater
WARNING
Risk of burns!
1
The cup heater
hot.
▶
Never touch the cup heater
hot.
▶
Allow the hot cup heater
down before touching it.
Tip: Place the cups with their base
on the cup heater to warm them to
1
optimum effect
▶ To activate or deactivate the cup
1
heater , press the
10 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
10.1 Changing the basic set-
tings
Press and hold buttons
1.
simultaneously for at
least 3 seconds.
Press button
2.
peatedly until the display shows
the required setting.
Confirm with "ok" button
3.
Press the
4.
change the setting.
Confirm with "ok" button
5.
a The display shows "Settings
saved".
Cup heater en
1
can become very
1
1
to cool
.
button.
and
re-
⁠ .
button
⁠ .
while
to
49