Peripheral Devices Are Not Recognized; I Cannot Connect To The Internet; I Cannot Connect To The Internet Via A Wireless Lan - Sony CLIE PEG-TH55 Frequently Asked Questions Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Peripheral devices are not recognized

B After turning off your CLIÉ handheld, remove the peripheral device and
reconnect it.
B For the latest information on peripheral devices supported by your CLIÉ
handheld, refer to the URLs on the last page of this manual and select the
appropriate model.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I cannot connect to the Internet

I cannot connect to the Internet via a wireless LAN

B Check that [Profile Name:] is correctly selected in the Wireless LAN
Setup screen, which can be displayed by tapping [Network]-[V Service:]-
[Wireless LAN]-[Details...] in the Preferences screen.
B Check that the settings for [Profile Name:], [WEP:] or [KEY:] are correct in
the Wireless LAN Setup screen, which can be displayed by following the
procedure below.
1 Select [Network] in the Preferences screen.
2 Tap [V Service:] to select [Wireless LAN].
3 Tap [Details...].
The Wireless LAN Setup screen is displayed.
4 Select one from the profile names in the list of [Profile Name:].
5 Tap [Edit].
B Your CLIÉ handheld may be connected to a wireless LAN access point
other than the target one when [-Auto Connect-] is selected.
In the Wireless LAN Setup screen, check that the target wireless LAN
access point is listed just below [-Auto Connect-] and [-Auto Connect-] is
selected.
(The list can be reordered by tapping
You can also select the profile name for the target wireless LAN access
point instead of selecting [-Auto Connect-] from [Profile Name:] in order to
explicitly connect to the target one.
32
or .)